New Copy Block Topic Module, Tuesday, April 09, 2024, 3:25:19:46 am

Sort

In Store

Speed

Price

Customer Rating

Online Savings

Availability

Sold By

New Sort & Filter on Topic Page Module, Monday, January 15, 2024, 3:08:36:58 pm

Best Match

Price: low to high

Price: high to low

Tomorrow

2 days

Anytime

Automotive

Electronics

Home

Home Improvement

Personal Care

Sports & Rec

4 - 5 Stars

3 - 3.9 Stars

Reduced Price

Online

Walmart

Marketplace sellers fulfilled by Walmart

Marketplace sellers

This mount is specifically designed for use on vertical surfaces. It has an attractive black molded body that looks great on any vehicle. When installed, the coax connectors are concealed on the inside of the vehicle (requires one 13/32'' (10mm) and one 13/64'' (5mm) mounting hole).<br. This mount may be used with single or dual installations. The actual mounting surface is approximately 3.125'' (79mm) x 1.675'' (43mm). Outward protrusion is about 1.875'' (48mm). This mount comes complete with all of the required mounting hardware; rubber gasket, metal reinforcement plate, nylon insulator and ground terminal lug. The M-2 can be mounted to surfaces up to 0.28'' (7mm) thick. If using a spring with a base diameter larger than 0.700'', a split lock washer is required between the mount and the spring to ensure proper seating of the spring to the mount surface. Specifically Designed for Vertical Mounting. Attractive Black Finish. All Connections are Sealed after Installation. All Installation Hardware Included. Supplied Rubber Gasket Seals the Connections and 2 Required Holes.- SKU: CBDST0854

Firestik M2 Molded Plastic Side Mount

5/8 Wave Length Design Rated @ 650 WattsCan be Used in Single or Dual ConfigurationsRequires Fine Tuning (SWR)Easy-Tune Bare-Hands Tunable TipHi-Performance Loading CoilCustom Blended Glass Fiber Reinforced ShaftWound with Heavy Insulated Copper Wire3/8 x 24 Threaded Base with Tapered Contact EndStatic Reducing Water-Tight Sleeve Containing UV & Pigment Stabilizers100 percent American Made with 100 percent American Materials- SKU: DAS1160

Firestik FS-3BK 3  Firestick Ii Tunable Tip Black

FIRESTIK - FL4-R 4 FOOT "FIREF

FireStik FL3-B Three Foot FireFly Antenna With Tuneable Tip (Black)

Those square holes in the bed rails of full size pick-up trucks are the prefect location for a ''no-holes'' antenna mount. The flat upper bracket is 6'' (152mm) long and extends out over the bed rail so you may mount your antenna without losing the ability to mount a camper shell. Includes stud mount, stainless steel brackets and hardware, and a gasket to protect the vehicle finish. No Hole Antenna Mount. Stainless Steel Bracket and Hardware. Uses K4 Stud Mount with Ring Terminals. Upper Bracket is 6'' Long (Extends over Bed Rail Giving Clearance for Camper Shell). Includes Gasket to Protect Vehicle Finish.- SKU: CBDST0885

Firestik SS194 Stake Hole Mount in.Extended in. with K-4 Stud

Firestik 5' (152cm) indoor cb base antenna

Firestik 5' (152cm) Indoor Cb Base Antenna

Firestik 4' (122cm) firestik ii heavy-duty antenna-5/8 wave (black)

Firestik 4' (122cm) Firestik Ii Heavy-duty Antenna-5-8 Wave (black)

Features. 5 ft&#46; 0&#46;38 x 24 in&#46; Thread Mast with Safety FlagSpecifications. Color&#58; White &#38; Orange. Dimension&#58; 1'' H x 1'' W x 60'' L. Weight&#58; 0&#46;62 lbs- SKU: CBDST6038

Firestik F5-W 5 ft. 0.38 x 24 in. Thread White Mast with Orange Safety Flag

actual_color

White-Orange

White & Orange

Features. Replacement Plastic Cap. Pack of 2Specifications. Color&#58; White. Dimension&#58; 2'' H x 2'' W x 2'' L. Weight&#58; 0&#46;1 lbs- SKU: CBDST5744

Firestik KWT-W Replacement Plastic Cap&#44; White - Pack of 2

Stranded Center Wire for More Flexibility. Useable with CB, Amateur Radio and Police Scanners. 95% Shielding for Better Noise Reduction. Exceeds Mil-Spec Requirements. 18' Length Terminated with PL259 Connectors. Designed to Work with Firestik K-4A or R-4A or any Mount Using an SO239 Connector.- SKU: CBDST3620

Firestik K8A 18 ft. RG58A-U COAX with 2 PL-259s

This kit is for car the owner who is looking to mount his antenna on the trunk deck without drilling any holes in the vehicle. You get FireStik's ''no-holes'' mount and 18 ft (5.5m) of professional grade Fire-Flex coaxial cable (with FireStik's exclusive Fire-Ring connector) all in one package!- SKU: CBDST0863

Firestik MK748R Trunk Lip Mount with 18Ft Fire-Ring Coax

FIRESTIK - FLT-B PAIR OF REPLACEMENT CAPS FOR FIRE FLY SERIES ANTENNAS

ABC Hammers, Inc. 4 lb. Brass Hammer with 14" Fiberglass Handle

Universal Quick Release PL&#45;259 Adapter by FireStik&#46;Unique quick release connector&#46; Attach to any PL&#45;259 type terminated cable&#46; Allows for quick connect&#47;disconnect of coaxial cable&#46; A must in areas that experience electrical storms&#46; Also great for test leads &#40;SWR meters, frequency counters, etc&#46;&#41; and situations where radio equipment is moved in and out of your vehicle or home for reasons of security or to be transported to a secondary location &#40;i&#46;e&#46; the repair shop because you forgot to disconnect your coax from the radio and the antenna was hit by lightening&#41;&#46; Features. Meticulously designed to deliver solid performance. Made using the latest in modern technology and advanced processes. Will help optimize the operation and style of your vehicle- SKU: LSC4614

Firestik QD-259 Quick Release Adapter

2 Stainlees Steel 3 Way Mounts With Cable. Manufactured to the Highest Quality Available. With True Enhanced Performance. Latest Technical Development.- SKU: CBDST0862

Firestik MK64A9A Dual Mirror Mount with Coax

Features. PL259 with Phenolic Insulator &#45; Requires InsertSpecifications. Dimension&#58; 1'' H x 2&#46;5'' W x 6'' L. Weight&#58; 0&#46;1 lbs- SKU: CBDST7765

Firestik PRO259 PL259 with Phenolic Insulator - Requires Insert

FIRESTIK - FG3648-R 3 FOOT NO GROUND PLANE CB SINGLE MIRROR MOUNT ANTENNA KIT IN RED

Mounts on Any Flat Vertical Metal Surface. Heavy Duty Stainless Steel. Will Support up to a 7' Antenna When all 4 Bolts are Secured. This Model Uses K4A Stud Mount for Using a PL259 Connector. Also Available with a K4 Stud Mount  (SS-24) It Uses Ring Terminals. Actual Size: 2.25'' Wide and 4.2'' Tall (Includes Stud) Outward Protrusion 1.9''.- SKU: CBDST0890

Firestik SS24A Side Mount with K4A Stud

UHF 90&#45;Degree Elbow by FireStik&#46; This connector is especially handy when the room behind the radio is limited and the use of the radios antenna connection places too much stress on the coaxial cable&#46; Screws on to the antenna connection located on the back of the radio and accepts all coaxial cables that are terminated with standard PL&#45;259 connectors&#46; Features. Meticulously designed to deliver solid performance. Made using the latest in modern technology and advanced processes. Will help optimize the operation and style of your vehicleSpecifications. Degree&#58; 90 deg- SKU: LSC9210

Firestik AR-7 90 deg UHF Elbow

Features. 3 ft&#46; Strobe Ready Stik 0&#46;38 in&#46; x 24 Base with FlagSpecifications. Color&#58; Red. Dimension&#58; 1'' H x 1'' W x 38'' L. Weight&#58; 1 lbs- SKU: CBDST4605

Firestik SR3-R 3 ft. Red Strobe Ready Stik 0.38 x 24 in. Base with Flag

The SS-174 fits well in the deeper hood channels found on many of the newer Ford and Chevy pick-ups. This mount isnt limited to pick-ups. It can be used on just about any vehicle with a hood and/or trunk. The bracket measures 2.9 (74cm) from the mounting base to the top of the bracket itself. The height from the mounting base to the first bend is 2.1 (53mm) so it can be used on channels with depths up to 2 (51mm). Designed for Hood and Trunk Applications. Installs Inside Channel of Your Hood or Trunk. No Visible Mounting Holes Required. Designed for Hood and Trunk Applications. No Visible Mounting Holes Required. Includes Crimp-On Base Stud Mount. For Firestik Antennas Up to 48''.- SKU: CBDST0883

Firestik SS174 Hood Channel Mount with K4 -Tall

Firestik - sr3-o 3' orange strobe ready stik with 3/8x24 threaded base & safety flag Firestik - sr3-o 3' orange strobe ready stik with 3/8x24 threaded base & safety flag Firestik - sr3-o 3' orange strobe ready stik with 3/8x24 threaded base & safety flag

Firestik SR3-O FIRESTIK - SR3-O 3' ORANGE STROBE READY STIK WITH 3/8X24 THREADED BASE & SAFETY FLAG"

For Jeep Wranglers Some Pre-1997 and Newer. Left or Right Side of Hood. 12 Gauge Stainless Steel Mount. All Mounting Hardware Hidden Under the Hood. Mount Accepts Standard 3/8'' x 24 Threaded Antennas.- SKU: CBDST0902

Firestik SSJ4 Crimp-on Jeep Wrangler Fender Antenna Mounts

<div><ul><li>Firestik Mirror Mount 3-Way w/K-4 Stud</li></ul></div>

FireStik SS-64 Stainless Steel 3-Way mounting Brackets

Universal Flat Surface Antenna Mount by FireStik&#46; This mount is very similar to, but more compact than the disc stud mounts&#46; The small 1 1&#47;4'' x 2 3&#47;4'' rectangular mounts can be used for trunk, roof, and fender applications&#46; Mounts include rubber gasket to protect vehicle finish&#46; Complete with K&#45;4A antenna stud&#46; Features. Meticulously designed to deliver solid performance. Made using the latest in modern technology and advanced processes. Will help optimize the operation and style of your vehicleSpecifications. Connection&#58; Screw&#45;on- SKU: LSC4613

Firestik K-154 Flat Surface Mount

Firestik 2" (61cm) firestik ii heavy-duty -antenna 5/8 wave (blue)

Firestik 2&quot; (61cm) Firestik Ii Heavy-duty -antenna 5-8 Wave (blue)

Firestik microphone hanger hook stainless steel

Firestik Microphone Hanger Hook Stainless Steel

Firestik Side Mount W-k-4 Stud

Now you can take advantage of the benefits of our exclusive FireRing connector and have the ease and convenience of being able to route your coax to the radio without the need for holes or passages that could be as large as one-inch. This cable is routed from the mount to the radio and the female mini-UHF connector will pass through a hole that is only 7/16'' (11mm)in diameter. After reaching the radio, completion is as simple as screwing on the supplied mini-UHF/PL-259 adapter and then screwing the PL to the radios antenna connection. No coax to process ...no soldering joints to complete and no tools needed.- SKU: CBDST0869

Firestik MU8R18 18 ft. Rg-58A-U Pl To Mini-Uhf To Fire-Ring

The quality of your communications will never be better than the quality of your coax. FireStik's dual lead, co-phase harness assemblies are made from their RG-59A/U, Fire-Flex coaxial cable. They may be used on any dual antenna installation. Stranded center conductor to maximize flexibility and prevent untimely breakage. Shielding coverage that averages 95% to protect against RF leaks and interference. Polyvinyl center insulation for ruggedness and longevity. Performance that exceeds mil-spec requirements for 75 ohm RG-59A/U coax. K-9A co-phase harness is made with two 18' (5.5m) leads. All three ends of this cable assembly is terminated with PL-259 type connectors. This cable is designed to be used with K-4A or R-4A antenna studs and any mounts that use either of these SO-239 stud mounts.- SKU: CBDST0821

Firestik K9A 18 ft. Dual Lead Coax with Pl259s

FS&#45;II 4&#39; Neon Green Heavy Duty 5&#47;8 Wave Antenna &#40;FS4&#45;NG&#41; by FireStik&#46; If you took the proven features and performance of the famous ''KW'' series antennas and added a unique tuning mechanism to the top, you would own the equivalent of a Firestik II, ''FS'' Series antenna&#46; Aside from the ease of tuning, the patented design broadens the antennas bandwidth to keep SWR lower over more channels&#46; The upper coil extension also increases the power handling capability of the antenna&#46; Or, they may be used in dual &#40;co&#45;phased&#41; configuration on any vehicle made from any type of material&#46; Like all CB antennas, the ''FS'' antennas should be fine&#45;tuned &#40;SWR&#41; in their final mounting location&#46; Specifications. Color&#47;Finish&#58; Neon Green. Length&#58; 4&#39;. Connectors&#58; 3&#47;8''. Power Handling&#58; 900W. Width&#58; 1&#47;2''- SKU: LSC9208

FireStik FS4-NG 4 ft. FS-II Neon Green Heavy Duty 5-8 Wave Antenna

These mounts are FireStik's most popular stainless steel mounts for flat surface applications. Applications are, for the most part, limited only by your imagination. Some popular applications include flat mirror arms, rails, bars, or step bumpers. The bracket itself is about 4'' (102mm) long by 1'' (25mm) wide. The supplied stainless steel mounting bolt is a hefty 3/8''-24 x 1'' long and includes a stainless steel nut and washers. This mount may be used with antennas up to 4' (1.2m) long.- SKU: CBDST3105

Firestik SS124 Crimp-On Stainless Steel Flat Universal Mount

FIRESTIK - KW4-Y 4 FOOT HEAVY DUTY TRIM TO TUNE 400 WATT TOP LOADED FIBERGLASS 5/8 WAVE CB ANTENNA WITH 3/8X24" THREADED BASE IN YELLOW"

The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end up with unneeded loss. and if that isn't enough, the stud mount must be strong enough to withstand all of the stress placed upon it from an antenna that is subject to severe wind load and vibration. Instead of inexpensive aluminum, FireStik uses chrome plated machine brass. Instead of 9/16'' (14mm) hex-stock, they use 5/8'' (16mm) stock. Instead of ABS or inferior plastic insulators, they use nylon. Instead of cadmium plated hardware, they use stainless steel. Furthermore, their heavy-duty 3/8'' center shanks can mean the difference between trouble free use and lost antennas. The K-4 stud utilizes ring terminal connectors (supplied) making it compatible with non-PL-259 terminated coaxial cables. In a typical installation, antennas with 0.600'' (15mm) of exposed threads can be used without the fear of bottoming out before proper tightening is accomplished. The K-4 can be used in any mount or mounting surface with a 1/2'' (13mm) hole.- SKU: CBDST4038

Firestik K4 STUD MOUNT .38 in.X24 THREAD LUG

FIRESTIK - MSM3-W HIGH PERFORMANCE 3' WHITE SCANNER ANTENNA WITH 3/8X24" THREADS"

FIRESTIK - MSM3-W HIGH PERFORMANCE 3' WHITE SCANNER ANTENNA WITH 3/8X24" THREADS"

These mounts are specifically designed for antenna installations up to 4' in length, on vehicles where other mounts might not work, offering a mount that can be affixed to a vertical inner door jamb such as rear or side door of a cargo van. The mounting screws should be on the inner edge of the jamb so there are no visible holes in the vehicle body. The bracket parts and mounting hardware is made of stainless steel - overall length is 4.2''. Bracket is 1 1/2'' with a 2'' reach for mounting inside the jamb. Stud bracket(where the stud is sitting in the photo) will swivel a full 180&deg;, 90&deg; in either direction to allow mounting on left or right of vehicle. Includes K-4T2 stud mount. Fully compatible with coax cables terminated with ring terminal connectors or those with unprocessed ends(included). Instructions for mounting options. Two year manufacturer  .- SKU: CBDST0887

Firestik SS204 Door-Hatch Edge Swivel Mount with K4 Stud

The quality of your communications will never be better than the quality of your coax. FireStik's dual lead, co-phase harness assemblies are made from their RG-59A/U, Fire-Flex coaxial cable. They may be used on any dual antenna installation. Stranded center conductor to maximize flexibility and prevent untimely breakage. Shielding coverage that averages 95% to protect against RF leaks and interference. Polyvinyl center insulation for ruggedness and longevity. Performance that exceeds mil-spec requirements for 75 ohm RG-59A/U coax. K-9 co-phase harness utilizes two 18' (5.5m) leads. One end is terminated with a PL-259 type connector to match the connector on your radio and the other two ends are terminated with ring terminals on the center conductors and spade connectors on the shields. This cable should be used in conjunction with K-4 or R-4 stud mounts and any mounts that use either of the lug-style stud mounts.- SKU: CBDST0820

Firestik K9 18 ft. Dual Lead Coax With Lugs

Firestik 4' (122cm) single mirror "ngp" kit complete (black)

Firestik 4' (122cm) Single Mirror &quot;ngp&quot; Kit Complete (black)

2M15-B - Firestik 15" 2 Meter (144-148MHz) Heavy Duty Antenna 1/4 Wave (Black) with tunable tip.The "2M15" series, 2 meter amateur antennas are little quarter wave wonders. Made of top quality materials, Firestik's proven antenna knowledge and their tunable tip design, Firestik built a pair of dependable antennas you can count on for your day to day communications.The 2M15-B is 100% American made with 100% American materials. The core material is solid 3/8" (9.5cm) fiber-rich, custom blended, fiberglass. Each is hand wound with double insulated 19 gauge copper wire. The 3/8"-24 threaded base will fit all common mounts and accessories. Both antennas are covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. A vinyl cap is provided to protect the tuning mechanism from the elements.Like all transmitting antennas, these antennas work best when mounted over sufficient ground plane. The versitility of the tuning screw design offers a wide tuning range. The lowest frequency is achieved by having the tuning screw in its highest lockable position and the vinyl cap installed. Likewise, the highest frequency of the antenna can be found with both the vinyl cap and tuning mechanism removed. The 2M15-B should be selected when the user has no need for the added protection from a spring.

Firestik 2M15-B 15 in. 2 Meter Antenna. .25 Wave -Black

FIRESTIK - FG3648-W 3 FOOT NO GROUND PLANE CB SINGLE MIRROR MOUNT ANTENNA KIT IN WHITE

Features. Mini UHF Male to PL259 Adaptors Wilson 1 &#38; 5000 CoaxsSpecifications. Dimension&#58; 7&#46;5'' H x 7'' W x 7'' L. Weight&#58; 2&#46;18 lbs- SKU: CBDST4566

Firestik(88)

Your data, your choice