New Copy Block Topic Module, Tuesday, April 09, 2024, 3:25:19:46 am

Sort

In Store

Speed

Price

Online Savings

Availability

Sold By

New Sort & Filter on Topic Page Module, Monday, January 15, 2024, 3:08:36:58 pm

Best Seller

Best Match

Price: low to high

Price: high to low

Tomorrow

2 days

Anytime

Automotive

Electronics

Home

Home Improvement

Sports & Rec

Reduced Price

Online

Walmart

Marketplace sellers fulfilled by Walmart

Marketplace sellers

<div><ul><li>AMPS compatible</li><li>Rubberized indexed grippers and foam backed cradle won鈥檛 scratch your device</li><li>Quick release button for easy phone access</li><li>Side arms adjust from 2.25" to 3.75" in width to fit nearly any phone</li><li>Ratcheted feet allow for access to data ports</li></ul></div>

Panavise PortaGrip Phone Holder with AMPS Adapter Plate

<div><ul><li>About this item </li><li> 6-Inch (152.4mm) overall mount length </li><li> Both adjusting points have a full range of motion: 210 degreesTilt, 360 degreesTurn & 360 degreesRotation </li><li> 1/4-20 mounting stud with lockring </li><li> Shafts are machined aluminum alloy 0.875-Inch (22.2mm) in diameter. Knob and tamper-resistant set-screw adjusting options included. </li><li> Square mounting base for solid surfaces, 2.5-Inch x 2.5-Inch (63.5mm x 63.5mm), </li></ul></div>

PanaVise 827-06 Deluxe Mount - 6-Inch

<body>The InDash mounts are designed so that after installation, phone is facing normal driver position for left-hand drive vehicles. </body>

PanaVise InDash - Mounting base for cellular phone

Panavise 897 CCTV Standard Adjustable J-Box Mount - Black Steel shaft is 0.875" (22.2mm) in diameter (hollow for lighter weight). 1/4-20 mounting stud with lockring. Fully adjustable at the camera (210Â° Tilt, 360Â° Turn & 360Â° Rotation). Ball swivel is 6.25" (158.8mm) from wall. Height of adjusting point is 3.5" (89mm). Integral J-Box mounting plate with 0.62" (15.9mm) cable pass thru hole. Knob and tamper-resistant set-screw adjusting options included. Black

Panavise 897 CCTV Standard Adjustable J-Box Mount - Black

Panavise DUAL DC CAR POWER ADAPTER Power adapter Dual DC Panavise Dual DC Car Power Adapter Power adapter Dual DC Panavise

Panavise 15951 Dual DC Car Power Adapter

PanaVise 827-06W Deluxe Mount, 6-Inch

<div><ul><li>About this item</li><li>Made in USA from 14 Gauge Steel, powder urethane coated</li><li>Professional Installation Recommend</li><li>For clean, easy, nearly invisible phone mount installation</li><li>Properly install your cellular phone or hands-free kit without entering the airbag deployment zone</li></ul></div>

Panavise Ford Mustang 2010 2011 2012 InDash Mount

Brand New PanaVise Custom InDash Mount for the 2007-2010 Hyundai Veracruz Model #: 75118-907 The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below. Compatible Car: <UL> <LI>2007-2010 Hyundai Veracruz</LI></UL> Mounting Instructions:<UL><LI>Mounting Location: Right Side of Climate Control <LI>Tools Required: Phillips Screwdriver <LI>Hardware Included: (2)A-#8x9/16" Needle Pt Screw</LI></UL> Step# 01 Remove right side air vent by radio by inserting dash tool into bottom of air vent bezel. Pull out to release (2) tight plastic clips. Continue by prying out bezel by radio releasing (3) clips while pulling out on AV bezel allowing to release (5) more clips. Step# 02 Locate the flat space on the lower right of the climate control, above a clip slot and screw hole closest to the front of the dash. Place InDash by PanaVise Mount over the screw hole and install (1) of the supplied screws. And install the other screw into the other hole on the InDash Mount. Step# 03 Replace the air vent. If we don't have it listed please email us.

PanaVise 07-10 Hyundai Veracruz InDash Mount 75118-907

Featuring Head , Bench Vise, Cast Aluminum Material, For Use With Mfg. No. 305, 300, 380, Includes (6) Slots: 7/16 W x 1-3/16 in. L, (6) 1/4 in. Bolt Holes Evenly Spaced on 4-3/8 in. Circle

PanaVise 337 Fixturing Head

<div><ul><li>About this item</li><li>AMPS compatible</li><li>Rubberized indexed grippers and foam backed cradle won’t scratch your device</li><li>Quick release button for easy phone access</li><li>Side arms adjust from 2.25" to 3.75" in width to fit nearly any phone</li><li>Ratcheted feet allow for access to data ports</li></ul></div>

Panavise 6" Communications Mount With Straight Shaft - BlackThese heavy-duty communications mounts first appeared in the mid-1980s and have been going strong ever since! Based on the famous "split-ball" incorporated into our work holding vises, these mounts are perfect for heavier electronics and active work situations â built tough with plenty of options and adjustability.

Panavise 6" Communications Mount With Straight Shaft - Black

Panavise InDash Mount for 1993-1995 Nissan Quest 75131-395 The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase. PLEASE NOTE THIS PART IS A CUSTOM ORDER AND SHIPPING MAY TAKE UP TO 14 DAYS. Mounting Location: Above center of Air Vent Tools Required: Phillips screwdriver Hardware Included: None Compatible Cars: <ul><li>1993-1995 Mercury Villager</li></ul><ul><li>1993-1995 Nissan Quest</li></ul>

Panavise InDash Mount for 1993-1995 Nissan Quest 75131-395

<div><ul><li>Choose one of our unique Bases depending on the application at hand. Simply assemble the Adjusting Knuckle, Shaft and Base and you're done!^Tri-foot Base with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle; 4" (101.6mm) outside diameter^1/4-20 mounting stud</li><li>Choose one of our unique Bases depending on the application at hand. Simply assemble the Adjusting Knuckle, Shaft and Base and you're done!^Tri-foot Base with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle; 4" (101.6mm) outside diameter^1/4-20 mounting stud</li><li>Choose one of our unique Bases depending on the application at hand. Simply assemble the Adjusting Knuckle, Shaft and Base and you're done!^Tri-foot Base with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle; 4" (101.6mm) outside diameter^1/4-20 mounting stud</li><li>Choose one of our unique Bases depending on the application at hand. Simply assemble the Adjusting Knuckle, Shaft and Base and you're done!^Tri-foot Base with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle; 4" (101.6mm) outside diameter^1/4-20 mounting stud</li><li>Choose one of our unique Bases depending on the application at hand. Simply assemble the Adjusting Knuckle, Shaft and Base and you're done!^Tri-foot Base with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle; 4" (101.6mm) outside diameter^1/4-20 mounting stud</li><li>Tri-foot Base with three 0.265-Inch (6.7mm) holes on a 3.25-Inch (82.5mm) bolt circle; 4-Inch (101.6mm) outside diameter^0.25-Inch 20 mounting stud</li></ul></div>

PanaVise 860 CCTV Tri-Foot Base (Black)

Solder Station Kit, Bench Vise, For Use With Mfg. No. 312, 308, 324, 350, Includes Mounting Hardware, Soldering Iron Holder, Controlled-Feed Solder/Wire Holder (For Standard-Sized Spools), (2) Nib Sponges with Self-Purging Slits

PanaVise 371 Solder Station

<div><ul><li>About this item</li><li>Double wound shaft will not droop or require safety wires^Shaft is covered with durable black vinyl^Full range of motion at the camera: 210° Tilt, 360° Turn & 360° Rotation</li><li>Double wound shaft will not droop or require safety wires^Shaft is covered with durable black vinyl^Full range of motion at the camera: 210° Tilt, 360° Turn & 360° Rotation</li><li>Double wound shaft will not droop or require safety wires^Shaft is covered with durable black vinyl^Full range of motion at the camera: 210° Tilt, 360° Turn & 360° Rotation</li><li>Double wound shaft will not droop or require safety wires^Shaft is covered with durable black vinyl^Full range of motion at the camera: 210° Tilt, 360° Turn & 360° Rotation</li><li>Double wound shaft will not droop or require safety wires^Shaft is covered with durable black vinyl^Full range of motion at the camera: 210° Tilt, 360° Turn & 360° Rotation</li><li>13-Inch (330.2mm) overall mount length (including shaft and ends). Base accepts shaft in vertical or horizontal position.^Double wound shaft will not droop or require safety wires^Shaft is covered with durable black vinyl^Full range of motion at the camera: 210 degreesTilt, 360 degreesTurn & 360 degreesRotation^1/4-20 mounting stud with lockring. Knob and tamper-resistant set-screw adjusting options included.</li></ul></div>

PanaVise 817-13 Flex Mount, 13-Inch

Brand New PanaVise Custom InDash Mount for theï¿½Sterling Truck Acterra Model #: 75149-105 Theï¿½Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, andï¿½nearly invisible phone mount installation. Proudly made in theï¿½USA from the highest qualityï¿½heavy gauge steel, this Panavise Custom Indash Mountï¿½has been fitted and producedï¿½specifically for yourï¿½car to provide the utmost convenience and practicality. Complete mountingï¿½instructions areï¿½included with your purchase and are also available below. Compatible Cars: <LI>2009 Sterling Truck Acterra, LT <LI>2005-2008 Sterling Truck AT, LT, Acterra</LI> Mounting Instructions Mounting Location:ï¿½Below right of instrument cluster D BR Tools Required: T-20 Torx driver Hardware Included: None Step# 01 With T-20 torx driver remove the (2) lower right screws that are below the OPT switches below the center air vent. Step# 02 Lift the bezel out enough to place the InDash by PanaVise Mount over the screw hole. Replace bezel and screws. If we don't have it listed please email us.

Panavise InDash Mount Sterling Truck Acterra 75149-105

Panavise 4" inch Slimline Phone Mount with Knob adjustment Part # 727-04 Slimline anodized aluminum mount utilizes a ball clamp housing for head positioning and tilting. Provides full 360 degrees of rotation at base and head except the 4 inch. Welded AMPS/NEC compatible top plate and mild steel permanently attached base. Small foot version is for tricky installations where the mounting surface is small. <UL> <LI>Knob adjustment at head only. <LI>AMPS-NEC Compatible head plate hole pattern. <LI>Shaft made of aircraft grade aluminum alloy. <LI>Mild steel mounting foot accomodates slightly irregular surfaces and will not crack. <LI>Concave design evenly distributes mounting load for maximum stability, eliminating "carpet float." <LI>Head pivots 210 and rotates 360. <LI>4" (101.6mm) overall length. </LI></UL> Compatible with: <UL> <LI>Any Cell Phone Car Kit</LI></UL> For other sizes or for other mounts please email us.

PanaVise 4" inch Gooseneck Phone Mount w/ Knobs 727-04

<div><ul><li>The small foot (1.625-Inch x 2-Inch) is recommended for under-the-dash installations or wherever space is at a premium. Knob and set-screw adjusting options included.</li><li>Overall mount height (including shaft) is 9-Inch (228.6mm)</li><li>210 degree Tilt, 360 Turn and 360 Rotation at both ends</li><li>Aluminum, zinc and steel construction</li><li>Rectangular AMPS pattern: 30mm x 38mm (1.181-Inch x 1.496-Inch) on center</li></ul></div>

Panavise 727-09 9-Inch Small Foot Slimline Pedestal Mount

Panavise Custom InDash Mount for Subaru B9 Tribeca '06 - BlackPanavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.Compatible With:<ul><li>Subaru B9 Tribeca '06</li></ul>

Panavise Custom InDash Mount for Subaru B9 Tribeca '06 - Black

<div><ul><li>Telescopes from 9.375 in. (238.1mm) to 13.625 in. (346.1mm) overall length.^Telescoping section indexed to prevent spinning.^Both Tri-Foot Wall-Ceiling base and T-Bar Clip included.^883-T is knob adjustment for ease of repositioning camera, without any tools.</li><li>Telescopes from 9.375 in. (238.1mm) to 13.625 in. (346.1mm) overall length.^Telescoping section indexed to prevent spinning.^Both Tri-Foot Wall-Ceiling base and T-Bar Clip included.^883-T is knob adjustment for ease of repositioning camera, without any tools.</li><li>Telescopes from 9.375 in. (238.1mm) to 13.625 in. (346.1mm) overall length.^Telescoping section indexed to prevent spinning.^Both Tri-Foot Wall-Ceiling base and T-Bar Clip included.^883-T is knob adjustment for ease of repositioning camera, without any tools.</li><li>Telescopes from 9.375 in. (238.1mm) to 13.625 in. (346.1mm) overall length.^Telescoping section indexed to prevent spinning.^Both Tri-Foot Wall-Ceiling base and T-Bar Clip included.^883-T is knob adjustment for ease of repositioning camera, without any tools.</li><li>Telescopes from 9.375 in. (238.1mm) to 13.625 in. (346.1mm) overall length.^Telescoping section indexed to prevent spinning.^Both Tri-Foot Wall-Ceiling base and T-Bar Clip included.^883-T is knob adjustment for ease of repositioning camera, without any tools.</li><li>Adjustable shaft: overall mount length from 9.375-Inch (238.1mm) to 13.625-Inch (346.1mm). Shaft locks tightly and is indexed to prevent rotation.^Use the Tri-Foot Base [4-Inch (101.6mm) outside diameter with three 0.265-Inch (6.7mm) holes on a 3.25-Inch (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails^Full range of motion: 210 degreesTilt, 360 degreesTurn & 360 degreesRotation^1/4-20 mounting stud with lockring^Knob and tamper-resistant set-screw adjusting options included</li></ul></div>

Panavise 883-T Dual Option Telescoping Mount (Black)

<div><ul><li>For shots close to the mounting surface</li><li>Compatible with all leading action cameras (GoPro - requires 1/4-20" adapter, Sony, Drift, JVC, Garmin and more...)</li><li>Features custom engineered composite material designed for light weight and maximum holding power.</li><li>Suction Cup made of high-grade material. Stays mounted in hot or cold.</li><li>Designed and manufactured by PanaVise Products, Inc</li></ul></div>

Panavise ActionGrip 13101 Shorty Suction Cup Camera Mount (Matte Black)

Panavise InDash Mount for the 2008-2010 Chrysler Sebring 75104-607 Model # 75104-607The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below. Compatible With:<UL> <LI>2007-2010 Chrysler Sebring Sedan</LI> <LI>2008-2010 Chrysler Sebring Convertible</UL>Mounting Instructions<UL> <li> Mounting Location: Right side of radio cavity <li>Tools Required: Dash Tool, Hook Tool, Phillips Screwdriver, T-20 Torx<li>Hardware Included: None</li></UL> Step 1: With hook tool, remove the air vent bezel that surrounds the radio by inserting the hook tool into the bottom corner Left or Right below the emergency flasher. Pull to release (1) clip on each side. Continue up the bezel releasing (2) more clips. Pull the bezel out releasing top lugs. Disconnect clock plug. Lay bezel onto towel on console. Step 2: With T-20 Torx driver, remove (4) radio screws. Pull out radio enough to get InDash by PanaVise Mount behind right radio mounting flange. Replace radio, screws and bezel. If we don't have it listed please email us

Panavise InDash Mount for the 2008-2010 Chrysler Sebring 75104-607

<div><ul><li>Tempered steel spring, zinc plated</li><li>Pivots away from the jaws when not in use</li><li>Slides onto 366 Wide Opening Head and 376 Extra-Wide Opening Head</li><li>Spring width: 3.375-Inch (85.7mm). Height: 1.13 (28.7mm)</li><li>Limited Lifetime Warranty!</li></ul></div>

PanaVise 358 Wire Manager for 366 and 396

Hold circuit boards up to 12-Inch  304 8mm  wide and up to 0 156  4mm  thick | Arms move independently and feature V shaped grooves | Shaft is 4 125  104 8mm  long and 5 8  15 9mm  in diameter | Height  bottom of shaft to tip of arms   10 875  276 2mm   Weight  1 0 lb   0 5kg  | Limited Lifetime Warranty  |

PANAVISE 315 Circuit Board Holder

<div><ul><li>Two adjusting points for maximum adjustability</li><li>GoPro 3-axis adapter features Panavise ball for Tilt, Turn and Rotate. No more linking together various pieces to point the camera where you need it. Infinite adjustability!</li><li>Compatible with all leading action cameras (GoPro, Sony, Drift, JVC, Garmin and more...)</li><li>Suction Cup made of high-grade material. Stays mounted in hot or cold.</li><li>Designed with aluminum components and custom engineered composites for light weight & maximum holding power, Designed and manufactured by Panavise Products, Inc.</li></ul></div>

Panavise AcitonGrip 13130 Action Grip Double Knuckle Suction Cup Camera Mount (Matte Black)

<div><ul><li>Powerful windshield suction cup designed to hold your phone securely to vehicle windshield. Stays mounted in hot or cold.</li><li>Fits most phones from 2.25 to 3.75 inches wide (with or without a case). Side arms adjust to fit nearly any phone (including the most popular handsets; iPhone 5s, Samsung, Motorola, HTC, LG and even larger phones such as Samsung Galaxy Note 3)</li><li>Once the arm width is set, phone is easily removed by rocking it to the side with a one-handed motion</li><li>PanaVise Tilt, Turn & Rotate makes it fully adjustable. Low profile design minimizes mount behind phone</li><li>Vertical low profile grips allow full access to touch screens - rubberized indexed grippers and foam backed</li></ul></div>

Panavise PortaGrip Phone Holder with Windshield Mount

Panavise L-Bracket with T-Bolt Slot for Car GPS Device - BlackStandard T-Bolt plate for use with most video screens, GPS units and other compatible mobile electronics. Black, Panavise L-Bracket with T-Bolt Slot Compatible with:<ul><li>Car GPS Device</li></ul>

Panavise L-Bracket with T-Bolt Slot for Car GPS Device - Black

<div><ul><li>About this item</li><li>Compatible with any camera: includes standard 1/4-20" ball and GoPro ball</li><li>Premium Materials: made of custom, engineered composites and light-weight aluminium</li><li>Fits round and oblong bars: 7/8" (min) to 1-1/4" (max)</li><li>Ideal handlebar mount for: bicycles, motorcycles, ATVs or any round or semi-round tube</li><li>Internal structured ribs design for high-strength holding power</li></ul></div>

PanaVise 13220 BarGrip Action Camera Handlebar Mount (Black)

PanaVise is a major manufacture of mobile electronics mounts for hands-free kits GPS units satellite radio receivers mobile video screens two-way radios and mobile data terminals -- if it's electronic and mobile we can hold it! The Panavise 782-10 10-Inch Stay-Put Flex Mount is time tested and proven to be one of the best Flex Mounts ever made! AMPS-compatible mounting plate. Overall mount length (including the shaft) is 10-Inch (254.0mm). Patented pinch design prevents the flex shaft from coming loose from the base or the mounting plate. Double wound shaft vinyl coated for heavy-duty protection. Base can be mounted vertically or horizontally; the shaft easily screws into either configuration. Rectangular AMPS pattern: 30mm x 38mm (1.181-Inch x 1.496-Inch) on center. Screw caps included for a finished look. All PanaVise Products are covered by a Limited Lifetime Warranty!

Panavise 782-10 10-Inch Stay-Put Flex Mount

<div><ul><li>About this item</li><li>AMPS compatible</li><li>Knob and set-screw adjusting options included</li><li>210 Degree Tilt, 360 Degree Turn and 360 Degree Rotation for full articulation</li><li>Flexible shaft positions exactly to where you need it</li></ul></div>

Panavise PortaGrip Phone Holder with 797-12 Uniflex Mount

Multi-Angle Vise, Base Type Stationary with Parts Tray, Jaw Width 5/16 In. , Max. Opening 12 In. , Throat Depth 6-3/16 In. , Jaw Face Grooved, Jaw Material Steel, Material Cast Zinc, Swivel Angle 360 Degrees , Overall Length 18-5/16 In. , Overall Width 8-7/16 In. , Overall Height 13-9/16 In. , Features Solder Station, Circuit Board Holder has Split-Ball Lock, Tilts 90 Deg, Turns 360 Deg and Rotates 360 Deg

PanaVise 324 Electronic Work Center

<div><ul><li>Suitable for electronics with AMPS mounting system</li><li>Adjust tilt with thumb wheel</li><li>Smooth adjusting action holds electronics firmly in place</li></ul></div>

PanaVise 684-101 AMPS Tipper with Adjustment Wheel

PanaVise Custom InDash Mount for the Hyundai Azera Model #: 75118-806 The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below. Compatible Cars: <LI>2006-20011 Hyundai Azera</LI>Mounting Instructions MOUNTING LOCATION: Right side of Radio TOOLS REQUIRED: Dash Tool, Hook Tool, Cutters, Towel, Phillips Screwdriver HARDWARE INCLUDED: None Step# 01 With hook tool assist, remove the long trim strip that goes from above the glove box to the instrument panel. Starting form the passenger side pull to release total of (7) clips. Remove (3) exposed Phillips screws from above the radio and climate control bezel. Remove (2) screws from under the bottom of the radio and climate control bezel. Step# 02 Remove the drivers side knee panel by removing the lower (2) Phillips screws. Pull from the top of the knee panel to release (2) clips. Remove (1) Phillips screws from below the ignition switch. Step# 03 Begin to pull off the radio and climate control bezel from the top corners, releasing (5-6) clips. Work your way around the bezel, including the ignition switch cover to below the cubby and up around the right side of the bezel to the top releasing a total of (9) clips. Step# 04 Move bezel to the right enough to get at the screws to the right side of the radio. Remove the screw. Place the mounting piece marked 32A onto the screw hole. Mark the lip area next to the radio you need to remove to allow mount to fit. With the cutters, carefully remove the section of lip you marked. Replace the 32A part and replace screw. Step# 05 Replace the bezel starting from the left side. Install the (5) total screws. Align the ignition switch cover and finish bezel install. Replace the long trim strip, securing all (7)clips. If we don't have it listed please email us.

PanaVise Custom InDash Mount for the Hyundai Azera (75118-806)

<div><ul><li>About this item</li><li>Overall mount height (including shaft) is 6-Inch (152.4mm)</li><li>AMPS-compatible. Knob and set-screw adjusting options included.</li><li>210 degree Tilt, 360 Turn and 360 Rotation at both ends</li><li>Aluminum, zinc and steel construction</li><li>Rectangular AMPS pattern: 30mm x 38mm (1.181-Inch x 1.496-Inch) on center</li></ul></div>

Panavise 6-Inch Slimline Pedestal Mount

AMPS Tipper with adjustment wheel. Interfaces between AMPS compatible mounting plate and AMPS compatible electronics

PanaVise Custom InDash Mount for the Smart Car Model #: 75150-109 The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below. Compatible Car: 2009 Smart Car FourTwo;

PanaVise InDash Mount for Mercedes Smart Car Four Two 2008-11

<div><ul><li>Colour : White</li><li>Country of Origin : United States</li><li>Model Number : 863W</li><li>Package Weight : 1.0 pounds</li></ul></div>

Panavise 863W CCTV T-Bar Ceiling Clip Base (Cream)

<div><ul><li>HOLD ANYTHING WITH A BELT CLIP</li><li>Versatile clip holder (holds clips up to 1.2 wide); attaches to any smooth, flat surface with double-sided tape.</li><li>Includes two buttons and double-sided tape to convert anything to button-back mounting</li><li>Use in the car for phones or MP3 players, or at home to keep your remotes close-at-hand</li></ul></div>

PanaVise 777 ClipCaddy Holder

Amps-compatible. Knob and Set-screw adjusting options included.? overall mount height (including shaft) is 6" (152.4Mm)? 210 tilt, 360 Turn & 360 rotation at both ends? aluminum, zinc and steel construction? Rectangular amps pattern: 30mm x 38mm (1.181" X 1.496") on center? concave standard foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 ? (63.5mm x 63.5mm)

PanaVise(62)

Your data, your choice