New Copy Block Topic Module, Tuesday, April 09, 2024, 3:25:19:46 am

Sort

In Store

Speed

Price

Customer Rating

Online Savings

Availability

Sold By

New Sort & Filter on Topic Page Module, Monday, January 15, 2024, 3:08:36:58 pm

Pentek PENTEK-CBR2-10 Lead Reduction Water Filters - 9-.75 in. x 2-.87 in.

Features:. Nominal 0.5 micron Pentek CBR2-10 Carbon Briquette Multimedia Water Filter Cartridges. The Pentek CBR2-10 water filter is an advanced multimedia cartridge designed to reduce chlorine taste and odor, dissolved and particulate lead, cysts, MTBE and certain volatile organic chemicals (VOCs). The Pentek CBR2-10 water filter cartridge reduces lead through 2,000 gallons, reduces VOC's and reduces MTBE.*. The Pentek CBR2-10 water filters reduce 99.95% reduction of Cryptosporidium, Giardia, Entamoeba and Toxoplasmacysts.*. The Pentek CBR2-10 water filter is a premium high capacity chlorine taste & odor reduction filter through more than 20,000 gallons.*. Enhanced dirt holding capacity.*. The Pentek CBR2-10 water filter cartridges are manufactured using a patented process, and combine powdered activated carbon (PAC) with a specially designed adsorbent medium for lead and mercury reduction. The Pentek CBR210 cartridges are protected by Endurawrap™, a uniquely formulated polyolefin bilaminate prefilter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges. In addition to lead reduction, the unique structure of the carbon block enables it to reduce Giardia, Cryptosporidium, Entamoeba and Toxoplasma cysts and fine sediment particles down to 0.5 microns. Both the Pentek CBR2-10 filter and the Pentek CBR2-10R filter are effective at reducing levels of chlorine taste & odor, MTBE, and VOCs. NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. NOTE: Certain states require system registration or certification for health-related contaminant reduction claims. NOTE: Chlorine and lead reduction tests conducted by Pentair Water Treatment at 0.6 gallons per minute with a Pentek Slim Line (SL) housing. Specs:. Dimensions: 9-3/4'' x 2-7/8'' (247 mm x 73 mm). Micron Rating (Nominal): 0.5 Micron. Temperature Rating: 40°F to 165°F (4.4° C to 73.9°C). Initial ?P (psi) @ Flow Rate (gpm):. 15.0 psi @ 1.0 gpm (1.0 bar @ 3.8 L/min). Chlorine Taste & Odor Reduction @ Flow Rate (gpm):. >20,000 gal @ 1.0 gpm (>75,700 liters @ 3.8 L/min). VOC* gal @ gpm =. 600 @ 0.6 (2,270 L @ 2.3 L/min). MTBE* gal @ gpm =. 500 @ 0.6 (1,890 L @ 2.3 L/min). Cyst Reduction*†: > 99.95%. Lead & Mercury Reduction:. 2,000 gallons @ 0.6 gpm (7,570 L @ 3.8 L/min). *NOTE: Based on manufacturer's internal testing. † NOTE: Giardia, Cryptosporidium, Entamoeba and Toxoplasma cyst claim based on tests showing greater than 99.95% reduction using NSF Standard 53 protocol.- SKU: CWD3246

Pentair Pentek 158649 3G Slim Line Filter Housing, 1/2" NPT #10 Under Sink Clear Water Filter Housing, Integral Bracket Cap with Pressure Relief Button, 10 Inch, Blue/Clear

SLIM FILTER HOUSING is ideal for low-flow applications with space restrictions | CLEAR SUMP HOUSING offers on-site examination of flow  cartridge life and performance | PRESSURE RELIEF BUTTON for easy cartridge replacement | COMPATIBLE WITH 10  x 2 5  sediment or carbon filter cartridge | BUILT-IN BRACKET in the housing cap |

Pentair Pentek EP-20BB Big Blue Carbon Water Filter, 20-Inch, Whole House Carbon Block Cartridge with Bonded Powered Activated Carbon (PAC) Filter, 4.5” x 20", 5 Micron

Pentek 150469 3/4-Inch 10-Inch Big Blue Filter Housing

Large filter housing for high-flow and heavy sediment applications. Reinforced polypropylene sump for strength and chemical resistance. Use with a 10" x 4-1/2" filter cartridge (sold separately). Pressure relief button for easier cartridge replacement. Initial pressure drop of 2 psi at a flow rate of 15 gpm.

Pentek PENTEK-SCBC-10 155350-43 / Scbc-10 Pentek Replacement Filter Cartridge

The Pentek SCBC-10 is a silver impregnated 0.5 micron carbon block engineered to reduce a broad spectrum of the worst contaminants like microorganisms and VOC's. Silver is a bacteriostatic agent that kills microorganisms stopping them in their tracks. If you are concerned about dangerous contaminants, the SCBC-10 will deliver clean, premium quality water you can trust.

Pentek Gac-5 Carbon Water Filters (4-7/8-Inch X 2-7/8-Inch)

This Pentek GAC-5 carbon filter cartridge reduces chlorine taste and odor in residential and commercial drinking water. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 25,000 gallons at a flow rate of 4 gallons per minute (gpm). The cartridge is made granular activated carbon (GAC) filter media encased in polystyrene with a spun polypropylene post filter. The nitrile butadiene rubber (Buna-N) and Santoprene (TPE, thermoplastic elastomer) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 3.0 pounds per square inch (psi) at a flow rate of 0.5 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This carbon filter cartridge is for treatment of residential and commercial drinking water. Specifications Post filter 20 microns Initial pressure drop at 0.5 gpm 3.0 psi Chlorine reduction capacity 250 gallons at 0.5 gpm Temperature range 40 to 125 degrees F (4.4 to 51.7 degrees C) Maximum dimensions (H x W) 4-7/8 x 2-7/8 inches (124 x 73 mm) Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%. H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Pentek GS-10RO-B 10 inch x 2 inch inline Water Filter

Pentek 150539 SW-1 Wrench for Slim Line Housings

155281-43 / Bbf1-20Mb Pentek Whole House Filter Replacement Cartridge

This Pentek BBF1-20MB water deionization filter cartridge reduces hardness minerals in low flow rate medical, pharmaceutical, cosmetic, and circuit board manufacturing applications. The media is mixed bed (cation and anion) moist spherical bead deionization resin that meets Food and Drug Administration standards, and there are polypropylene pre- and post-filters to reduce the possibility of water bypassing the resin. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has a capacity of 1850 grains, an initial pressure drop of 1.10 pounds per square inch (psi) at a recommended flow rate of 1.25 gallons per minute (gpm), and a temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C). This water deionization filter cartridge is for the demineralization of water used in various industrial processes. Specifications Capacity 1850 grains Initial pressure drop at 1.25 gpm 1.10 psi Temperature range 40 to 100 degrees F (4.4 to 37.8 degrees C) Maximum dimensions (H x W) 20 x 4-1/2 inches (508 x 114 mm) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.Demineralizes water for medical, pharmaceutical, cosmetic, and circuit board manufacturing applications|Mixed bed moist spherical bead deionization resin with polypropylene pre- and post-filters|Capacity of 1850 grains|Initial pressure drop of 1.10 psi at a recommended flow rate of 1.25 gpm|Temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C)

Pentek CRFC20-BB Carbon Filter Cartridge, 20-Inch x 4-1/2-Inch, 25 Micron

Brand: PentekFeatures: <ul>
<li>Reduces chlorine and chloramines in residential and commercial drinking water</li>
<li>Nominal filtration rating of 20 microns</li>
<li>Granular activated carbon (GAC) media with spun polypropylene wrapped inner core</li>
<li>Initial pressure drop of 2.5 psi at a flow rate of 5 gpm</li>
<li>Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)</li>
</ul>model number: CRFC-20BBPart Number: 155967-43Details: Description:? 
 
Pentek CRFC-20BB Water Filter Cartridge Specs: Dimensions: 20" x 4-1/2" (508 mm x 114 mm) Initial &Delta;P (psi) @ Flow Rate (gpm): 2.5 psi @ 5 gpm( 0.17 bar @ 18.9 L/min)1 psi @ 2.5 gpm (0.07 bar @ 9.5 L/min) Chloramine Taste & Odor Reduction (3.0 - 0.5 ppm) @ Flow Rate (gpm): 10,000 gallons @ 5 gpm25,000 gallons @ 2.5 gpm Temperature Rating: 40?F to 125?F (4.4? C to 51.7?C)EAN: 0051678967430Package Dimensions: 20.0 x 5.0 x 5.0 inches

Pentair Pentek 166201 Big Clear Filter Housing, 1&quot; NPT #20 Whole House Heavy Duty Water Filter Housing with Pressure Relief Button, 20-Inch, Blue/Clear

Brand: PentekColor: ClearFeatures: <ul>
<li>HEAVY DUTY FILTER HOUSING ideal for large-capacity, high flow applications</li>
<li>CLEAR SUMP HOUSING offers on-site examination of flow, cartridge life and performance</li>
<li>PRESSURE RELIEF BUTTON for easy cartridge replacement</li>
<li>COMPATIBLE WITH ANY 20" x 4.5" Big Blue or other heavy duty sediment or carbon filter cartridge</li>
<li>CONSTRUCTED of reinforced polypropylene (cap) and Styrene acrylonitrile (sump)</li>
</ul>Binding: Kitchenmodel number: 16620Part Number: 166201Details: Pentair Pentek Big Clear Filter Housings offer the versatility to meet all of your large-capacity filtration needs, including high-flow and heavy-sediment applications. The extra large housing allows for greater cartridge capacity, reducing the number of vessels required for high flow-rate applications. Sumps are available in both 10" and 20" lengths. The cap is available with 1" NPT inlet and outlet ports. The 1-1/2" internal port allows a greater volume of liquid to pass through the cap more rapidly. Big Clear Filter Housings offer on-site examination of flow, performance, and cartridge life and are ideal for a variety of applications. The 1" polypropylene caps are available with a pressure-relief button on the inlet side to relieve pressure inside the housing . Caps are constructed of reinforced polypropylene. The 10" sumps are made of Lexan and the 20" sumps are SAN (Styrene acrylonitrile).EAN: 0051678662014Package Dimensions: 24.7 x 7.9 x 7.7 inches

Pentek PENTEK-DGD-7525-20 155356-43 / Dgd-7525-20 Pentek Whole House Replacement Sediment Filter Cartridge

The Pentek DGD-7525-20 water filters reduce the need for multiple housing step-down filtration systems. The Pentek DGD-7525-20 water filters are pure polypropylene construction resistant to chemicals and corrosion. The Pentek DGD-7525-20 replacement filters are designed for purity, bacteria resistance, and chemical resistance. The Pentek DGD-7525-20 water filter cartridge will not add taste, odor, or color to the liquid being filtered. The Pentek DGD-7525-20 water filter is ideal for all residential, rural, commercial, industrial, and municipal applications. The Pentek DGD-7525-20 larger diameter of the prefilter reduces the particle load to the postfilter, allowing it to operate at higher velocities. The effective DGD-7525-20 filter depth is increased to a full 233% of standard spun-polypropylene or string-wound filters. This increased depth provides for very high particulate reduction efficiencies and added loading capacity.

Pentek DGD-2501-20 Spun Polypropylene Filter Cartridge, 20" x 4-1/2"

<div>This Pentek DGD-2501-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.<h4>Specifications</h4>Nominal filtration rating (pre-filter)25 micronsNominal filtration rating (post-filter)1 micronInitial pressure drop at 20 gpm<1 psiTemperature range40 to 145 degrees F (4.4 to 62.8 degrees C)Maximum dimensions (H x W)20 x 4-1/2 inches (508 x 114 mm)Materials certificationNSF/ANSI standard 42 The nominal filtration rating is for a particle removal efficiency of 85%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</div>Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. Spun polypropylene for resistance to chemicals and bacteria. Initial pressure drop of less than 1 psi at a flow rate of 20 gpm. Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C)..

Pentek 150239 / Hfpp-112-Pr10 Pentek Big Blue Whole House 10 Inch Filter Housing

Durable construction. If installed before appliances, the number 10 Big Blue housings extend the life of washing machines, water heaters, and other household appliances by reducing sediment before it reaches the appliances when a sediment filter is used. Ideal for homes, farms, private wells, restaurants, swimming pools, spas, and trickle irrigation. Four times the capacity (lifespan) of standard 10-inch whole house water filters. The number 10 heavy-duty Big Blue whole house water filter has high-flow and heavy-sediment capabilities. The number 10 Big Blue housing's pressure release button on the cap allows for release of the whole house water filter pressure in order to more easily unscrew the sump from the cap. Leaking and clogging is prevented by the dynamically sealing, self-cleaning o-ring. Two number 10 Big Blue housings can be connected with a pipe nipple or pipe union. The union will allow for adjustment of the fitting in the event of leakage. Use the NP-15 pipe nipple to connect two number 10 Housings with 1.5-inch inlet/outlets.

Pentair Pentek PD-5-20 Sediment Water Filter, 20-Inch, Whole House Polydepth Polypropylene Replacement Cartridge, 20" x 2.5", 5 Micron

Pentek PD-5-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 5 Microns

Pentek BP-420-10 Polypropylene Bag Filter

The Pentek BP-420-10 Filter Bag provides higher productivity with faster bag change-outs The bags are manufactured from felt because it can take on a heavy load of solids, in comparison to similar mesh fabrics The manufacturing process involves multiple steps: layering together the felt material on a screen for support, then finishing it with a glaze for a secure bond This is a product that can certainly hold its own as it filters dirt and debris

Pentek PENTEK-R30-20BB Pleated Polyester Water Filters

30 Micron Pentek R30-20BB Pleated Polyester Water Filter Cartridges. Pentek R30-20BB water filters produce healthier, better-tasting drinking water. The Pentek R30-20BB filter cartridge pleated design maximizes dirt-holding capacity. The Pentek R30-20BB water filter is versatile and reusable, allowing for a variety of uses. The Pentek R30-20BB replacement filter cartridge has durable polyester media that is bacteria and chemical resistant. The R30-20BB filter can be used on chlorinated or non-chlorinated water supplies. The Ametek R30-20BB sediment water filter is manufactured from a durable, non-woven and reusable polyester fabric that is suitable for a wide range of filtration uses. The Pentek R30-20BB water filter media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat in this fashion fuses the three components together forming a unitized end cap and gasket. The overlap seam is sonically welded to reduce internal bypass improving filtration efficiency. The Pentek R30-20BB filter cartridge media is pleated to maximize dirt-holding capacity and extend the time period between changes or cleaning. R Series filter cartridges are resistant to both bacteria and chemical attack making them suitable for a variety of residential, commercial and industrial applications. Dimensions: 20'' x 4-1/2'' (508 mm x 114 mm). Micron Rating (Nominal): 30. Temperature Rating: 40&deg;F to 125&deg;F (4.4&deg;C to 51.7&deg;C). Initial ?P (psi) Flow Rate (gpm): <1 psi 20 gpm (<0.1 bar 76 L/min). Filter Media: Non-Woven Polyester. End Caps: Vinyl Plastisol. Core: Polypropylene.- SKU: CWD1935

Pentek PENTEK-EPM-20BB Carbon Block Water Filters

The Pentek EPM-20BB filter cartridge is a Nominal 10 micron Modified Epsilon Carbon-Briquette Water Filter Cartridges. The Pentek EPM-20BB water filter has the highest carbon block dirt holding capacity for maximum cartridge life (based on manufacturer's internal testing). The Pentek EPM-20BB filter reduces bad taste and odor and chlorine taste and odor reduction (based on manufacturer's internal testing). The Pentek EPM-20BB water filter cartridge has low pressure drop. The Pentek EPM-20BB cartridges are a modified version of the ''EP Series'' cartridge. An economical price makes this cartridge suitable for taste, odor and chlorine taste and odor reduction, as well as sediment filtration. When greater chlorine taste and odor reduction is needed, use the EP-20BB water filter. Ametek EPM-20BB water filter cartridges are manufactured using a patented process that yields a cartridge with a nominal 10-micron filtration rating, high porosity and chlorine taste and odor reduction. The high porosity design helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. The Pentek EPM-20BB filter cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges. The Pentek EPM20-BB water filter cartridges are manufactured entirely from FDA-compliant materials making them an ideal choice for a wide range of residential, food service, commercial and industrial applications. Dimensions: 20'' x 4-5/8'' (508 mm x 118 mm). Micron Rating (Nominal): 10 Micron. Temperature Rating: 40&deg;F to 180&deg;F (4.4&deg; C to 82.2&deg;C). Initial ?P (psi) Flow Rate (gpm): 4.0 psi 4 gpm (0.28 bar 15 L/min). Chlorine Taste and Odor Reduction Flow Rate (gpm): >30,000 Gallons 4 gpm (>113,500 liters 15 L/min).- SKU: CWD1995

Pentek FloPlus-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron

<div>This Pentek FloPlus-10 carbon block filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 10,000 gallons at a flow rate of 1 gallons per minute (gpm). This cartridge is made of modified bonded powdered activated carbon (PAC) filter media that provides efficient cyst reduction with a flow rate and dirt-holding capacity comparable to those of a 10-micron filter. The Santoprene (TPE, thermoplastic elastomer) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 53 for quality assurance, and is used for purification of residential and commercial drinking water.<h4>Specifications</h4>Nominal filtration rating0.5 micronsInitial pressure drop at 1 gpm2 psiRemoval of protozoan cysts99.95%Chlorine reduction capacity10,000 gallons at 1 gpmTemperature range40 to 180 degrees F (4.4 to 82.2 degrees C)Maximum dimensions (H x W)9-3/4 x 2-7/8 inches (248 x 73 mm)Cyst reduction certificationNSF/ANSI standard 53 The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</div>

166219 / Big-Clear-Lx-10 Pentek Big Clear Whole House 10 Inch Filter Housing

The number 10 Big Clear housing is a large capacity housing suitable for high flow applications. The extra large housing allows for greater water filter cartridge capacity, reducing the number of vessels required for high flow-rate applications. The number 10 Big Clear Housing will meet all of your large-capacity filtration needs, including high-flow and heavy-sediment applications. Durable construction. Ideal for homes, farms, private wells, restaurants, swimming pools, spas, and trickle irrigation. The water filter cartridge is not included with the housing. This allows you to purchase the best water filter for your water supply. Big Clear Filter Housings offer on-site examination of flow, performance, and cartridge life and are ideal for a variety of applications. The polypropylene caps include a pressure-relief button on the inlet side to relieve pressure inside the housing when changing water filter cartridges. Whole House housings extend the life of washing machines, water heaters, and other household appliances. 1-inch inlet/outlet for high-flow and heavy-sediment capabilities with minimal pressure drop. Leaking is prevented by the dynamically sealing O-Ring. The O-Ring should be replaced periodically to prevent leaks. Number 10 Big Clear Whole House Housing Tips: For many applications, it makes sense to install two whole house housings. The first housing is for sediment reduction. The second housing is for the carbon filter to improve taste and odor and reduce additional contaminants. By installing the sediment filter first, the carbon filter will last longer because it does not get clogged with sediment. Since carbon filters are more expensive, it is better to have the sediment filter first that needs to be replaced more often. If you install two whole house housings, there is a double mounting bracket available for installation of two housings. If you have a lot of sediment in your water, you may want to consider three housings. The first two housings are.1" NPT inlet and outlet ports|Housing accommodates any 10 inch heavy duty filter cartridges with a 4-1/2" diameter|Built in pressure-relief button

Pentek 150367 PBH-420-1 1-Inch 20-Inch Bag Vessel Assembly

Brand: PentekFeatures: <ul>
<li>Lightweight bag vessel filter assembly for low flow rate residential, commercial, and industrial applications</li>
<li>Reinforced polypropylene for strength and resistance to corrosion and chemicals</li>
<li>Use with standard 4" x 18-1/2" filter bags (sold separately)</li>
<li>Initial pressure drop of 1 psi at a flow rate of 15 gpm</li>
<li>Maximum temperature of 100 degrees F (37.8 degrees C)</li>
</ul>model number: PBH-420-1Part Number: 150367Details: Bag filter size (H x W) (sold separately) 18-1/2 x 4 inches (470 x 102 mm) Initial pressure drop at 15 gpm 1 psi Maximum temperature 100 degrees F (37.8 degrees C)EAN: 0051678503676Package Dimensions: 24.8 x 7.5 x 7.5 inches

Pentair Pentek CBC-10 Carbon Water Filter, 10-Inch, Under Sink Carbon Block Replacement Cartridge with Bonded Powdered Activated Carbon (PAC) Filter, 10&quot; x 2.5&quot;, 0.5 Micron, Pack

Brand: PentekColor: WhiteFeatures: <ul>
<li>HIGH-CAPACITY SMALL PARTICULATE REDUCTION of bad taste & odor, chlorine and certain VOCs to provide great tasting drinking water</li>
<li>FITS ALL 10" standard housings and can replace any 10" x 2.5" carbon filter cartridge</li>
<li>EFFECTIVE AT FILTERING fine sediment chlorine taste and odor</li>
<li>NSF INTERNATIONAL tested and certified for your peace of mind</li>
<li>20,000 GALLON CAPACITY. Replace every 3 months or when you notice a drop in water pressure or water quality</li>
</ul>Binding: Kitchenmodel number: CBC-10Part Number: 155162-43-APCPackage Dimensions: 13.5 x 10.9 x 10.1 inches

Pentek PENTEK-BPHE-420-1 255024-03 / Bphe-420-1 Pentek Polypropylene High Efficiency Bag Filter

The Pentek BPHE-420-1 High Efficiency Filter Bag is ideal for critical applications requiring higher productivity combined with greater dirt-holding capability. Microfiber media are covered with spun-bonded polypropylene. The filter features a thermally-welded, unique design that results in consistent filtration efficiencies. The Pentek Polypropylene High Efficiency Bag Filter fits Pentek PBH-420 housings. 98% efficient to the 1 micron level. Compatible with a wide range of acidic and alkaline fluids, and other corrosives. Withstands high temperatures.

Pentair CBR2-10R Carbon Filter Cartridge, 0.5 Micron

<div>This Pentek CBR2-10R carbon filter cartridge reduces protozoan cysts, chlorine taste and odor, lead, mercury, methyl tertiary butyl ether (MTBE), volatile organic compounds (VOCs), and fine sediment in residential drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 20,000 gallons at a flow rate of 0.6 gallon per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has a flow restrictor to limit the flow rate to 0.6 gpm for sufficient contact time with the filter media, and it operates over a temperature range of 40 to 165 degrees F (4.4 to 74 degrees C). This filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for purification of residential drinking water in under-sink installations.<h4>Specifications</h4> Nominal filtration rating 0.5 micron Removal of protozoan cysts 99.95% Chlorine reduction* 20,000 gallons at 0.6 gpm Lead and mercury reduction 2,000 gallons at 0.6 gpm VOC reduction 600 gallons at 0.6 gpm MTBE reduction 500 gallons at 0.6 gpm Operating temperature range 40 to 165 degrees F (4.4 to 74 degrees C) Maximum dimensions (H x W) 9-3/4 x 2-7/8 inches (248 x 73 mm) Materials certification NSF/ANSI standard 42 The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</div>

Pentek PENTEK-SW-4 144368 / Sw-4 Pentek Water Filter Wrench Accessory

The Pentek SW-4 Filter wrench is a durable and simple filter housing removal tool that will make changing filters easier. Used on the Pentek Big Blue filter systems.

Pentair Pentek NCP-BB Big Blue Carbon Water Filter, 10-Inch, Whole House Non-Cellulose Carbon Impregnated Pleated Filter Cartridge, 10&quot; x 4.5&quot;, Pack of 8, Gray

Brand: PentekColor: GrayFeatures: <ul>
<li>PROVIDES SUPERIOR sediment filtration and chlorine taste and odor reduction</li>
<li>FITS ALL 10" Big Blue Housings or other 10" heavy duty housings and can replace any 10" x 4.5" carbon filter</li>
<li>SUITABLE FOR MUNICIPAL AND NON CHLORINATED WATER APPLICATIONS unlike cellulose cartridges</li>
<li>HIGH DIRT LOADING CAPACITY WITH MINIMAL PRESSURE DROP due to the pleated design</li>
<li>COMBINATION OF PLEATED POLYESTER MEDIA AND CARBON FILTRATION produces extended service life</li>
</ul>Binding: Kitchenmodel number: NCP-BBPart Number: 155398-43-APCDetails: Pentair Pentek NCP Series Cartridges are constructed from a carbon impregnated non-cellulose media. They offer sediment filtration, as well as taste, odor and chlorine taste & odor reduction in one cartridge. Unlike cellulose cartridges, NCP Series Cartridges can be used for municipal and non-chlorinated water applications. Pleats provide additional surface area for high dirt loading capacity, while maintaining minimal pressure drop. This combination of a pleated polyester media and carbon filtration produces an outstanding filter cartridge with extended service life. NCP Series Cartridges are excellent polishing filters, closed loop streams and are ideal for post reverse osmosis and well water applications.Package Dimensions: 19.3 x 10.5 x 10.0 inches

Pentek 150435 3/4 inch Clear 10 inch Standard Filter Housing

The Pentek 150435 is a clear standard sized filter housingThe Pentek 150435 34 #10 clear HousingBlack Mounting Bracket cap with Pressure Relief is ideal for many different low-flow applications including: Undersink countertop Pre and Post RO system The Pentek 150435 features a pressure release button on the cap, making changing the filter simple Pentek 150435 Specifications 34 NPT 12 58 x 5 14 For use with 2 12 to 2 78 diameter filters

Pentek RFFE20-BB Iron Reduction Filter, 20x4.5-Inch &amp; EP-20BB Carbon Block Filter Cartridge, 20-Inch x 4-5/8-Inch, 5 Microns

Brand: PentekFeatures: <ul>
<li>Product 1: Iron reduction filter cartridge for use with a #20 Pentek Big Blue filter housing (not included)</li>
<li>Product 1: Reduces the presence of dissolved iron for improved taste, less staining, and reduced chance of pipe and water heater damage</li>
<li>Product 1: Effectively reduces the presence of iron in water when concentration is 3 ppm or less</li>
<li>Product 1: Lifespan of 26,000 gallons at 3 ppm</li>
<li>Product 2: Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water</li>
<li>Product 2: Nominal filtration rating of 5 microns</li>
<li>Product 2: Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life</li>
<li>Product 2: Initial pressure drop of 5.5 psi at a flow rate of 5 gpm</li>
</ul>Binding: Product Bundlemodel number: RFFE20 BBDetails: Pentek RFFE20-BB Iron Reduction Filter, 20x4.5-Inch 
This Pentek 155263 RFFE20-BB radial flow iron reduction cartridge is suitable for reducing the presence of dissolved iron in water supplies with concentrations up to 3 parts per million (ppm) for improved taste, less staining, and reduced chance of pipe and water heater damage. It is designed for use with a #20 Pentek Big Blue filter housing (not included), and operates at a maximum temperature of 100 degrees F (37.8 degrees C). It has a lifespan of 26,000 gallons for water supplies with an iron concentration of 3 ppm, and a longer lifespan at lower concentrations. This iron reduction cartridge is suitable for residential and commercial filtration applications, with pre-sediment and post-carbon treatment recommended for best results. Specifications Lifespan at 3 ppm 26,000 gallons Lifespan at 2 ppm 40,000 gallons Lifespan at 1 ppm 80,000 gallons Lifespan at 0.5 ppm 160,000 gallons Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5m Filter

The Fibredyne CFB-Plus10BB big blue water filter cartridges are an enhanced version of our CFB product. CFB-Plus series products are modified molded blocks manufactured using our proprietary fibredyne technology. The result is a single cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge.

Pentek 150233 20-BB 1-Inch Big Blue Filter Housing

Brand: PentekColor: BlueFeatures: <ul>
<li>Large filter housing for high-flow and heavy sediment applications</li>
<li>Reinforced polypropylene sump for strength and chemical resistance</li>
<li>Use with a 20&rdquo; x 4-1/2&rdquo; filter cartridge (sold separately)</li>
<li>Pressure relief button for easier cartridge replacement</li>
<li>Initial pressure drop of 1 psi at a flow rate of 15 gpm</li>
</ul>model number: 1" Big Blue NPTPart Number: 150233Details: This Pentek 150233 20-bb 1&rdquo; #20 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque Blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1&rdquo; female national pipe thread taper (NPT) threaded input and output connections and a nitrile butadiene rubber (buna-n) o-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20&rdquo; x 4-1/2&rdquo; filter cartridge (sold separately). it has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees c). this filter housing meets national Sanitation foundation/American national standards institute (nsf/ansi) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others. Large filter housing for high-flow and heavy sediment applications reinforced polypropylene sump for strength and chemical resistance use with a 20 inch x 4-1/2 inch filter cartridge (sold separately) pressure relief button for easier cartridge replacement initial pressure drop of 1 psi at a flow rate of 15 gpmEAN: 0051678502334Package Dimensions: 24.7 x 7.8 x 7.8 inches

Pentek PENTEK-150235 1.5 in. Whole House Water Filter System

Large capacity whole house water filter housing for high flow applications. The 20 heavy-duty whole house water filter construction can be used for heavy sediment applications. Durable construction. The 20 Big Blue housing's pressure release button on the cap allows for release of the whole house water filter pressure in order to more easily unscrew the sump from the cap. If installed before appliances with a sediment filter, the 20 Big Blue water filter housings extend the life of washing machines, water heaters, and other household appliances by reducing sediment before it reaches the appliances. Ideal for homes, farms, private wells, restaurants, swimming pools, spas, and trickle irrigation. Leaking and clogging is prevented by the dynamically sealing, self-cleaning o-ring. Dimensions: 23-7/8'' x 7-1/4'' (606 mm x 184 mm). Maximum Temperature: 100&deg;F (37.8&deg;C). Maximum Pressure: 90 psi (6.2 bar). Housing: Polypropylene (Blue). Cap: Polypropylene (HFPP). O-Ring: Buna-N.- SKU: CWD2189

Pentek PENTEK-RFC-BB 155141-43 / Rfc-Bb Pentek Whole House Filter Replacement Cartridge

The Pentek 155141, RFC-BB Radial-Flow Granular Activated Carbon Cartridge Filters out chlorine and odor from drinking water. The filters has a flow rate of 2 GPM and a capacity of 35,000 gallons.

Bag filter size (H x W) (sold separately) 18-1/2 x 4 inches (470 x 102 mm) Initial pressure drop at 15 gpm 1 psi Maximum temperature 100 degrees F (37.8 degrees C)

Pentek PENTEK-HFPP-1-WPR10 150238 / Hfpp-1-Wpr10 Pentek Big Blue Whole House 10 Inch Filter Housing

Pentek's Big Blue filter housings offer the versatility to meet all of your large-capacity filtration needs, including high-flow and heavy-sediment applications. The Pentek-HFPP-1-WPR10 is manufactured from durable polypropylene and has excellent chemical resistance. The HFPP-1-WPR10 housing is comparable with a wide variety of heavy duty filter cartridges and is ideal for high flow rate applications. The Pentek Big Blue Whole House 10-inch Filter Housing has 1-inch NPT inlet and outlet ports. Housing accommodates any 10-inch heavy duty filter cartridges with a 4-1/2-inch diameter. Constructed of durable reinforced polypropylene.

Pentek BBF1-20MB Water Deionization Filter Cartridge, 20-Inch x 4-1/2-Inch

Brand: PentekFeatures: <ul>
<li>Demineralizes water for medical, pharmaceutical, cosmetic, and circuit board manufacturing applications</li>
<li>Mixed bed moist spherical bead deionization resin with polypropylene pre- and post-filters</li>
<li>Capacity of 1850 grains</li>
<li>Initial pressure drop of 1.10 psi at a recommended flow rate of 1.25 gpm</li>
<li>Temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C)</li>
</ul>model number: BBF-20MBPart Number: 155281-44Details: The Pentek BBF1-20MB filter cartridge is manufactured using an FDA-compliant resin that has been subjected to additional postproduction steps to minimize the total organic carbon (TOC) level. Convenient and cost-effective for many applications where low levels of total organic carbon (TOC) and total dissolved solids (TDS) are required. PCF Series cartridges have been developed in response to the requirements for deionized water in many industries. NOTE: For drinking water use. DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. NOTE: Do not use cartridges on equipment that has an electric conductivity water level indicator. The BBF1-20MB has also been branded under Pentek, Ametek, Culligan, Kleen Plus, Plymouth Products, Pentair, American Plumber, Bruner and USFilter. The BBF1-20MB are high-capacity, semi-conductor grade resin cartridges ideal for use in pharmaceutical and medical laboratories, cosmeticsEAN: 0051678281031Package Dimensions: 21.2 x 5.2 x 5.0 inches

Pentek 156017-02 ST-1 3/4-Inch Stainless Steel Filter Housing

Brand: PentekFeatures: <ul>
<li>Filter housing for high pressure and hot water applications</li>
<li>Brushed stainless steel 304 for resistance to corrosion and high temperatures</li>
<li>Holds standard double open end (DOE) filter cartridges</li>
<li>Recommended flow rate of 10 gpm</li>
<li>Maximum operating pressure of 250 psi</li>
</ul>model number: 3/4" Stainless Steel NPTPart Number: 156017-02Details: Description: 
Pentek ST-1 Stainless Steel Replacement Water Filter: Maximum cartridge diameter 3" (76 mm). The Pentek ST-1 will NOT accept GAC, CC, CGAC, TSGAC, WS, PCF or PCC Series filter cartridges. The Pentek ST-1 housing accepts a complete range of 10 inch standard double open end (DOE) water filter cartridges. Filter cartridge life depends on the water filter cartridge purchased Filter cartridge not included Sediment filters reduce dirt, sand, silt, sediment, rust particles, and scale particles. Choose from one of our sediment water filters at the 10" x 2.5" Standard Filter Page Drinking water filters produce healthier, better-tasting drinking water. Choose from one of our carbon drinking water filters at the 10" x 2.5" Standard Filter Page Pentek ST-1 Parts & Accessories: If you are planning to mount the Pentek ST-1 housing, you will need the Pentek 156037 Mounting Bracket with Screws. The Pentek 143126 is the replacement o-ring for the Pentek ST-1 housing. One o-ring is included with the ST-1 housing. The o-rings should be replaced every two to three filter changes. The Pentek 143220 is the replacement head nut kit for the Pentek ST-1 housing. One head nut kit is included with the ST-1 housing and only needs to be replaced if it breaks. The Pentek 143339 is the replacement head nut gasket for the Pentek ST-1 housing. One head nut gasket is included with the ST-1 housing. The Pentek ST-1 Housing is Also Known As: American Plumber, Pentek, USFilter 156017, 156017-02, 15601702 Stainless Steel Housing Ametek 156039, 156039-02, 15603902 Stainless Steel Housing American Plumber ST-1 Stainless Steel Housing Ametek ST-1 Stainless Steel Housing US Filter ST-1 Stainless Steel HousingEAN: 0051678017029Package Dimensions: 15.8 x 4.5 x 4.4 inches

Pentair Pentek C1-20 Carbon Water Filter, 20-Inch, Whole House Dual Purpose Powered Activated Carbon Cartridge Filter, 20" x 2.5", 5 Micron

Pentek - 155155-43 CC-10 Coconut Carbon Filter Cartridge, 9-3/4" x 2-7/8", 20 Micron

Pentair Pentek NCP-20BB Big Blue Carbon Water Filter, 20-Inch, Whole House Non-Cellulose Carbon Impregnated Pleated Filter Cartridge, 20" x 4.5", 10 Micron

Pentek(53)

Your data, your choice