New Copy Block Topic Module, Tuesday, April 09, 2024, 3:25:19:46 am

Sort

In Store

Speed

Price

Customer Rating

Online Savings

Availability

Sold By

New Sort & Filter on Topic Page Module, Monday, January 15, 2024, 3:08:36:58 pm

Flex Seal Spray Rubber Sealant Coating, Brite, 14-oz

It sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating that will Stop Leaks Fast®. Once dry, can be painted any colour. DIRECTIONS: Read entire can. Wear face and eye protection, protective gloves, and clothing. Make sure the surface is clean, dry, and free of grease, oil, and dirt. Shake well. Spray 8” to 12” from surface, using an even, sweeping motion. Apply multiple, even coats until ALL cracks and holes have been filled. IMPORTANT: Allow 24 to 48 hours to dry before applying another coat. Let it dry completely. (It usually takes up to 24 to 48 hours to fully cure.) Use Flex Seal ONLY in a well-ventilated area. When using inside, prevent vapor build-up by opening doors and windows. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights or other sources of ignition. FLEX TIPS: Spray a larger area than area where the leak is and feather the edges. For best results, apply multiple coats rather than one thick coat and use at can temperatures above 60ºF.Make sure Flex Seal has filled ALL cracks and holes and is FULLY CURED before testing product. If light can pass through, apply additional coats.

Flex Tape White 4" x 5', Rubberized waterproof tape.

FLEX TAPE® is a super strong waterproof tape that can instantly patch, bond, seal virtually anything. It can be applied on dry or wet surfaces and it even works underwater! Flex Tape’s powerful adhesive bonds instantly to almost any surface and actually gets stronger with time and pressure. Has a thick, flexible rubberized backing that conforms to any shape and object. UV resistant, VOC- free, and withstands extreme temperature and weather conditions. Available in black, white, clear and gray. Flex Tape works on: PVC, acrylic, metal, steel, copper, aluminum, wood, ceramic, porcelain, tile, glass, rubber, fiberglass, stucco, plaster, stone, cement, concrete, dry wall, EPDM roofs, some plastics, fabrics, vinyl and more.

FLEX SEAL LIQUID BLACK 16 US FL.OZ. LIQUID RUBBER SEALANT COATING, STOPS LEAKS FAST!

FLEX SEAL® LIQUID is a thick rubberized liquid that you can brush, roll, dip or pour. It starts as a thick liquid and dries to a strong, flexible, watertight, rubberized coating. It seals out air, water, and moisture and is mildew, chemical, and UV resistant. Non-hazardous, non-flammable, and safe around plants and animals. Available in black and white. It's perfect for concrete and asphalt repair, foundation repair and preventing basement seepage, weatherizing and sealing out moisture, home and roof repair, RV and motorhome weatherizing and repair, pools and pool equipment, outdoor ponds and birdbaths, and so much more! It works on concrete, glass, brick, stucco, masonry, wood, copper, plastic, tile, fabrics, wires, vinyl, fiberglass, ceramic, porcelain, metal, aluminum, natural stones, foam, asphalt, Hypalon polyurethanes, and more.

FLEX SEAL LIQUID WHITE 16 US FL.OZ. LIQUID RUBBER SEALANT COATING, STOP LEAKS FAST!

Flex Seal Clear 14 oz, Rubberized sealant spray.

FLEX SEAL® is actually liquid rubber in a can! It sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating. Flex Seal coats, seals, protects and Stops Leaks Fast!™ Flex Seal works on: Wood, metal, tile, concrete, masonry, fabric, glass, plastic, aluminum, porcelain, dry wall, rubber, cement, some vinyl’s and more.

Flex Seal Spray Black 14 oz, Rubberized sealant spray.

FLEX SEAL® is actually liquid rubber in a can! It sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating. Flex Seal coats, seals, protects and Stops Leaks Fast!™ Flex Seal works on: Wood, metal, tile, concrete, masonry, fabric, glass, plastic, aluminum, porcelain, dry wall, rubber, cement, some vinyl’s and more.

FLEX SEAL SPRAY WHITE 14 OZ LIQUID RUBBER SEALANT COATING, STOP LEAKS FAST!

FLEX SEAL® is actually liquid rubber in a can! It sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating. Flex Seal coats, seals, protects and Stops Leaks Fast!™ Perfect for: roof repair, weatherizing your home, gutters, foundation and concrete waterproofing, indoor and outdoor projects, pools, RV, motorhome, car and boat, bathroom fixes, furniture, and so much more! Works on: wood, metal, tile, masonry, fabric, glass, plastic, porcelain, dry wall, cement, some vinyl’s and more.

Flex Paste, Black, Super Thick Rubber Spreadable Paste, 9 oz

Starts out as a thick paste and dries to a strong, flexible rubber coating. Won’t shrink or wash away and can be painted any colour. It can be applied on dry or wet surfaces, even underwater. Available in white and black. In Tubs and Cartridges. Caulk gun required to use cartridges. Introducing FLEX PASTE™ Max in Canada, a super thick rubberized paste that clings to the surface and instantly fills large gaps, cracks and holes. Once dry, Flex Paste turns into a strong, flexible, watertight, rubberized coating that seals out air, water and moisture. Our super thick formula will not wash away, and will even cure underwater. DIRECTIONS: Protective clothing & eyewear are recommended. Do not shake or stir product. Surface must be free of grease, oil & dirt. Remove silica gel packet and slowly lift protective foil from the surface. Do not discard foil or silica gel packet! Using putty knife, trowel or similar tool, remove an even layer from the top surface. Do not scoop deeply into the tub as this may create air pockets. Apply a generous amount to the surface using a smooth motion. Etching the surface will increase adhesion.  Sanding is not recommended, instead smooth to desired finish or add designs to create unique artistic textures.  Always make sure all cracks & holes have been completely ﬁlled & cured before testing.  DRY TIME: FLEX PASTE begins to cure once exposed to air, moisture & humidity and will skin in 15 to 30 minutes. Allow each coat to dry before applying additional coats. FLEX PASTE cures in 24 to 48 hours and gets stronger over time. CLEAN UP: Use a cloth with mineral spirits or acetone to clean your tools and work area. Do not use water.  PRESERVING FLEX PASTE: After each use, press the foil onto the center of the remaining material and continue pressing outward so the foil remains in contact with the material. As foil reaches the edge of the tub, press around the inside perimeter, keeping the excess foil up. Replace silica gel packet and secure the lid tightly. Before reuse, remove any dried material that may have formed on the inside perimeter of the tub or on the surface. Store in a humidity-controlled environment.

Flex Seal Mini, Clear, Aerosol Liquid Rubber Sealant Coating, 2 oz

All the strength of the original Flex Seal in portable size. Sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating that Stops Leaks Fast®. Flex Seal Mini is actually liquid rubber in a can! It sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating. Available in 2 oz. size, in three colours: black, white or clear. DIRECTIONS: Read entire can. Wear face and eye protection, protective gloves, and clothing. Make sure the surface is clean, dry, and free of grease, oil, and dirt. Shake well. Spray 8” to 12” from surface, using an even, sweeping motion. Apply multiple, even coats until ALL cracks and holes have been filled. IMPORTANT: Allow 24 to 48 hours to dry before applying another coat. Let it dry completely. (It usually takes up to 24 to 48 hours to fully cure.) *Use Flex Seal ONLY in a well-ventilated area. When using inside, prevent vapor build-up by opening doors and windows. Ensure fresh air entry during application and drying. *Do not use near heat, sparks, pilot lights or other sources of ignition. FLEX TIPS: Spray a larger area than area where the leak is and feather the edges. For best results, apply multiple coats rather than one thick coat and use at can temperatures above 60ºF. Make sure Flex Seal has filled ALL cracks and holes and is FULLY CURED before testing product. If light can pass through, apply additional coats.

Flex Seal Liquid, Rubber Sealant Coating, Black, 32-oz

FLEX SEAL LIQUID is a thick rubberized liquid that you can brush, roll, dip or pour. It starts out as a thick liquid and dries to a strong, flexible, watertight, rubberized coating. Seals out air, water, and moisture and is mildew, chemical, and UV resistant. Available in Black, White, Gray, and Clear. It's perfect for concrete and asphalt repair, foundation repair and preventing basement seepage, weatherizing and sealing out moisture, home, and roof repair, RV and motorhome weatherizing and repair, pools and pool equipment, and so much more! It works on concrete, glass, brick, stucco, masonry, wood, copper, plastic, tile, fabrics, wires, vinyl, fiberglass, ceramic, porcelain, metal, aluminum, natural stones, foam, asphalt, Hypalon polyurethanes, and more.

Flex Super Glue Canadian Gel 15G Bottle

Our high-performance super glue is designed to work on all types of household repairs. Built with a precision applicator to make usage easy and effective, even in small or hard-to-reach areas. Bonds plastic, metal, ceramic, leather, wood, paper & more! Directions: CLEAN THE SURFACE: Surfaces need to be clean, dry and free of oil or grease. SHAKE VIGOROUSLY: When using Flex Super Glue Gel 15g, shake the bottle vigorously towards the tip. SQUEEZE: Remove Cap and squeeze. Apply 1 drop of glue per square inch. APPLY PRESSURE: Apply pressure until set (5-45 seconds). Allow up to 1 hour to cure. REPLACE CAP AND STORE: Replace cap and store upright in cool, dry location. Set, cure and dry times vary based on application.

Flex Seal Spray Rubber Sealant Coating, Terra-Cotta, 14-oz

Flex Seal Spray Flood Protection, Removable Liquid Rubber in a Can, 10 oz

Flood Protection Spray should be used as a primer coating prior to applying our other Flood Protection products and/or as a final coat to help fill any small pinholes or openings that may have been missed. Use Flood Spray in combination with our other Flood Protection products.  Our Flood Protection Spray starts out as a liquid. It seeps into gaps, cracks and openings and dries to a strong, flexible, rubberized coating. It can be used as a primer coating for hard-to-reach areas or as a final coat of protection to help seal any small pinholes or openings that may have been missed. It blocks out water, air, and moisture, while remaining flexible. Once flood waters recede, our Flood Spray can be easily removed. Flood Spray can be used as a primer coating, prior to applying our other Flood Protection products, or as a final coat of protection to fill any small openings or pinholes that may have been missed. When used as a primer, apply Flood Paste and Flood Liquid on top of the Flood Spray. When used as a final coat, apply Flood Spray on top of all previous layers of Flood Protection products. We recommend you always use Flood Spray in combination with our other Flood Protection products. Apply multiple coats of Flood Spray to seal hard-to-reach areas, such as door tracks, seams, windowsills, small openings, corners, irregular shapes, and more. DRY TIME Depending on temperature, humidity and thickness of coating, our Flood Spray will dry to the touch in approximately 30 to 60 minutes and fully cure in approximately 12 to 24 hours. Allow product to fully cure before floodwaters arrive. COVERAGE The coverage for the 10oz Flood Spray, when applied 8 to 12 inches from the surface, is approximately 40 linear feet. IMPORTANT INFORMATION Always follow local warnings regarding evacuations. Depending on the age and type of construction, there may be areas that cannot be seen or sealed. Unsealed porous surfaces, such as concrete, can seep water during extended underwater exposure. Our Flood Protection products are NOT intended for flash floods, extreme winds or water pressure, to protect against flying or floating debris, or if there is structural damage to the building. ADDITIONAL INFO All of our Flood Protection products are Patent Pending for both products and uses. Made in Canada with globally sourced materials. Colour of product is high-visibility yellow.

Flex Seal Pool Patch and Repair Kit

Our Pool Patch and Repair kit will make fixing your pool easy, with everything you need to make the repairs quickly, even underwater. Use on above ground pools, in-ground pools, pool liners, hot tubs and spas. Perfect for fixing leaks, securing pool tiles, repairing pool plumbing, torn or broken patio furniture, damaged pool covers, and much more. This convenient kit includes: FLEX TAPE ® Mini - If your Above Ground Pool, or Pool Liner is leaking, you can fix it in minutes with Flex Tape. It can be applied on dry or wet surfaces, and it even works underwater! FLEX GLUE® Mini Clear - The super strong, crystal-clear waterproof adhesive with amazing instant grab and hold. Can be applied on dry or wet surfaces, even underwater. Solvent-free, paintable, and no run and drip for overhead applications. Our kit is designed to be used in several applications around your pool.  Directions: Above Ground Pool:  First, locate the leak. Use a clean cloth and remove any oil, dirt, or grime from the interior and exterior of the pool.  Repair the inside of the pool first. You don’t have to drain the pool as Flex Tape®can be applied wet or dry, it even works underwater!  Flex Tape is specially formulated with a thick, flexible, rubberized backing that conforms to any shape or object. Remove the backing on your Flex Tape. Just peel, stick, and seal! Please the adhesive side of the Flex Tape directly on the leak on the interior surface. Press down firmly.  You may want to place a piece of wood or hard surface on the exterior to help apply pressure.  Continue pushing directly on the Flex Tape. Press down firmly to remove any creases, folds, or air bubbles. You can use squeegee or a roller to help smooth it out. The secret is pressure and time. Now repair the outside of the pool using the same process. By applying Flex Tape on both the interior and exterior, you’ll create a super strong double layer of protection. You pool should now be leak-free and ready to enjoy for years as Flex Tape’s bond increases over time! Pool Liners:  Same as above but without the exterior application. Tiles:  Use your Flex Glue® for repairing or replacing loose or missing tiles. Again, no need to drain your pool. Flex Glue can be applied underwater ,it even dries underwater! Make sure the surface is clean from dirt, oil, and grime. Remove the cap and peel or puncture the foil cover. Squeeze from the bottom of the tube. Apply liberally to the non-decorative side of the tile and then push it into place. Apply firm pressure for 10-30 seconds or longer so instant grab can take hold.  Flex Glue cures in 24-48 hours and reaches maximum strength in 7 days. Replace cap to help prevent drying. Store in a cool, dry place.

FLEX SEAL FLEX SEAL GREEN 14OZ (Pack of 6)

Brand Name: Flex Seal Sheen: Satin Color: Green Product Type: Rubber Spray Sealant Container Size: 14 oz. Coverage Area: 12 sq. ft. Inverted Spray Ability: No UV Resistant: Yes Recommended Surface: Most Surfaces Packaging Type: Spray Can Full Cure Time: 48 hr. Time Before Recoating: 24 hr. Indoor or Outdoor: Indoor and Outdoor Primer Required: No Common Flex Seal Colors Applications: Ideal for arts and crafts projects and hobbies* Perfect for sealing outdoor decorative items indoor and outdoor furniture* Transform and protect virtually everything

FLEX SEAL FLEX SEAL BROWN 14OZ (Pack of 6)

Brand Name: Flex Seal Sheen: Satin Color: Brown Product Type: Rubber Spray Sealant Container Size: 14 oz. Coverage Area: 12 sq. ft. Time Before Recoating: 24 hr. Packaging Type: Spray Can Primer Required: No Full Cure Time: 48 hr. Recommended Surface: Most Surfaces Inverted Spray Ability: No Indoor or Outdoor: Indoor and Outdoor UV Resistant: Yes Common Flex Seal Colors Applications: Ideal for arts and crafts projects and hobbies* Perfect for sealing outdoor decorative items indoor and outdoor furniture* Transform and protect virtually everything

FLEX SEAL FLEX SEAL ALMOND 14OZ (Pack of 6)

Flex Seal Satin Almond Rubber Spray Sealant 14 oz.

FLEX SEAL FLEX SEAL BLUE 14OZ (Pack of 6)

Brand Name: Flex Seal Sheen: Satin Color: Blue Product Type: Rubber Spray Sealant Container Size: 14 oz. UV Resistant: Yes Primer Required: No Packaging Type: Spray Can Full Cure Time: 48 hr. Indoor or Outdoor: Indoor and Outdoor Time Before Recoating: 24 hr. Coverage Area: 12 sq. ft. Recommended Surface: Most Surfaces Inverted Spray Ability: No Common Flex Seal Colors Applications: Ideal for arts and crafts projects and hobbies* Perfect for sealing outdoor decorative items- indoor and outdoor furniture* Transform and protect virtually everything

FLEX SEAL FLEX SEAL RED 14OZ (Pack of 6)

Brand Name: Flex Seal Sheen: Satin Color: Red Product Type: Rubber Spray Sealant Container Size: 14 oz. Time Before Recoating: 24 hr. Coverage Area: 12 sq. ft. UV Resistant: Yes Packaging Type: Spray Can Primer Required: No Inverted Spray Ability: No Full Cure Time: 48 hr. Recommended Surface: Most Surfaces Indoor or Outdoor: Indoor and Outdoor Common Flex Seal Colors Applications: Ideal for arts and crafts projects and hobbies - Perfect for sealing outdoor decorative items - indoor and outdoor furniture - Transform and protect virtually everything!

Flex Seal(19)

Your data, your choice