Hopper Type Plastic Dryer Plastic Injection Molding Hot Air Drying Machine 50KG 220V

Working principle: through the fan supply air, blowing to the heating tube in the heating cylinder, and then controlled by the temperature controller air supply temperature, uniform flow in the drying drum, to the purpose of drying.

The contact part of the machine and raw materials are made of stainless steel, so that the raw materials are not contaminated.

The heating tube is elbow type, effectively prevent dust accumulation.

This machine has uniform hot air distribution, high drying efficiency, temperature controller adopts proportional deviation type, temperature difference is controlled within plus or minus 3 degrees.

The machine can dry the raw materials which are wet due to packaging and transportation, and is used to remove the moisture on the surface. It is suitable for PP, PE, ABS, PVC and other raw materials.