Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail.?Permanent fastener with good joint strength.
Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.
Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Product Name: Semi-Tubular Rivet
Shank Diameter(d): M4(0.16 inch)
Length(L): 10mm(0.4 inch)
Hole Diameter(d1): 2.4mm(0.09 inch)
Hole Depth(t): 4mm(0.16 inch)
Head Diameter(dk): 7.7mm(0.3 inch)
Head Thickness(k): 1.25mm(0.04 inch)
Net Weight: 84g?
200pcs(+/-2%) x Semi-Tubular Rivet
- Long length rivets can be applied without buckling or bending the rivet shank.
- Can be used to fasten similar or different materials of multiple work-pieces.
- Inexpensive alternative to threaded fasteners, permanent fastener with good joint strength.
- Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.