PAINT IT! Premixed Textured Floor Coating DECK GREY

Interior/Exterior - Ideal for driveways, walkways, patios, wood & concrete surfaces.


Sold and shipped by

 We're sorry! This product is not available. 

Description & Features+

PAINT IT! Premixed Texsture Floor Coating is a waterborne 100% acrylic non-slip, textured coating that provides a decorative light texture on surfaces's of concrete and wood where increased traction is required.  It is non-flammable, low odor and is evnvironmentally safe.  Can be used as a decorative and protective coating on interior or exsterior concrete, asphalt, wood stairs, floors, pool decks, patios, loading docks, sidwalks, residential garages carports residential driveways, ramps, balconies etc.  It will help prevent weather deterioration of concrete while providing a unique light surface texture.


For best results, apply two coats by brush, roller, squeegee, or texture pump.  Use a synthetic roller with a short nap (3/16"or 1/4").  Apply product at a rate of 100 to 120 sq. ft.  (60 sq.ft. in two coats).  Work in areas of 5’x7’ floor surface.  Pour approximately 1/3 gallon in an ‘S’ pattern.  Evenly distribute by roller, working in a slow back and forth motion.  Then finish by lightly rolling in one direction.  The second coat should be applied at right angles to the first coat.  If relative humidity is high (80% or higher), allow an extra period of drying time between coats.  Do not dilute, apply if the threat of rain is imminent or if the air/surface temperature is expected to be below 50 degrees F within   the first 24 hours of application.  Drying time 1-4 hours, 24 hours for light foot traffic, 3-5 days for vehicular traffic.  Allow 14 days for a full cure before allowing vehicles to park on Texstured Floor Coating. 


Roller covers with water.  Dried PAINT IT! Premixed Textured Floor Coating will be difficult to remove from any surface.

Solid Color Deck Grey

100% Acrylic Durability

Resistant to Houshold Chemicals

Interior or Exterior Use

Great for Pool Decks

Use PAINT IT!  High Adhesion Primer-Sealer

Assembled product dimensions: L 6.75 inches x W 6.75 inches x H 8.00 inches x W 12.00 pounds


Interior/Exterior concrete or wood
1 Gallon
Assembled Product Height
8 Inches
Assembled Product Length
6.75 Inches
Assembled Product Weight
12 Pounds
Assembled Product Width
6.75 Inches
Product Identifiers
Walmart Item #
Model #

From the Manufacturer +

Ratings & Reviews+

Q & A+



Store details