New Copy Block Topic Module, Tuesday, April 09, 2024, 3:25:19:46 am

Sort

In Store

Speed

Price

Customer Rating

Online Savings

Availability

Sold By

New Sort & Filter on Topic Page Module, Monday, January 15, 2024, 3:08:36:58 pm

Milescraft 1318 DrillMate Drill Guide with Chuck

<div><ul><li>Perfect for straight or angled drilling, drilling on the edge of a board or on round stock</li><li>Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" capacity chuck with key</li><li>Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base</li><li>Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter</li><li>Adjustable depth stop and spring action control of the head</li></ul></div>

90 Degree Drive 90+ Right Angle Drill Attachment

90 Degree Drive 90+ Right Angle Drill Attachment Milescraft Increase the versatility of your existing power drill with the Milescraft Drive 90+ right angle drill attachment. Simply insert the Drive 90+ right angle drilling attachment into the chuck of your drill for access to those hard to reach and tight spaces.

Milescraft 1603 KneeBlades

Brand: MILESCRAFTColor: Yellow/BlackFeatures: <ul>
<li>Tapered gel pad designed to evenly displace weight and lessen pressure on the knee, while fitting the contour of the knee</li>
<li>Hook and loop (one strap) secures KneeBlades comfortably with less tension on the back of your knee and allows for easy on and off</li>
<li>Non-marring, durable casters have a load rating of 80 lbs. per caster</li>
</ul>Binding: Tools & Hardwaremodel number: 1603Part Number: 16030003Details: The Milescraft KneeBlades are designed for any job where you are required to be on your knees. The high quality KneeBlades allow for more balance, flexibility and mobility. The three-wheeled mobile base allows for full 360&deg; turning capability, without lifting from the floor. The close to the ground design minimizes back stress. With the push of a button, you can go from KneeBlade to knee-pads.EAN: 0737888160303Package Dimensions: 11.0 x 10.7 x 6.8 inches

Milescraft 5300 Fluted Wood Dowel Pin, 1/4-Inch

Milescraft 1212 Signpro

Brand: MILESCRAFTColor: BlackFeatures: <ul>
<li>Includes-1/4-Inch and 3/8-Inch tungsten carbide tipped core box router bits</li>
<li>Includes turn-n-lock base plate and metal nose bushings</li>
<li>Low profile C clamps and new end frames provide a stable routing surface</li>
<li>Includes over 200 self spacing durable polymer blend templates</li>
<li>Easy and consistent to use!</li>
</ul>Binding: Tools & Hardwaremodel number: 1212Part Number: 1212Details: Miles craft's best Sign saking jig yet! For signs up to 36-inches. All of the convenience and features of the 1206 sign crafter with great improvements will make you a 'signpro'! Improvements include: sturdier rails touch The work surface for increased stability, improved end caps allow for firm clamping, includes 2 low profile C clamps that allow the router base to pass unobstructed. Included turn lock bushings are metal nose for improved durability, Includes a 1/4-Inch core box router bit for smaller templates in addition to the 3/8-Inch bit included in the sign crafter, and finally, the signal includes a set of 40 vertical number templates not available before.EAN: 0737888121229Package Dimensions: 18.9 x 7.4 x 3.5 inches

Milescraft 5301 Fluted Wood Dowel Pin, 5/16-Inch

Milescraft 84040113 FramingSquare300-Imperial

Brand: MILESCRAFTFeatures: <ul>
<li>Built in retractable edge guide</li>
<li>Includes euro style hinge mounting holes</li>
<li>Has three quick angle finders for 30-degree, 45-degree and 60-degree angles</li>
</ul>Binding: Tools & Hardwaremodel number: 8404Part Number: 84040113Details: This imperial framingsquare300 is used to lay out a square or right-angle. It can also be used to measure angles with the built in easy angle readout.EAN: 0737888840403Package Dimensions: 11.8 x 7.9 x 0.4 inches

Milescraft 8460 MC-Square300 (Metric) - Aluminum Framing and Woodworking Square

Brand: MILESCRAFTColor: BlackFeatures: <ul>
<li>Inside and outside scales for measuring and marking the inside and outside of your work piece</li>
<li>300mm square with 1/4&Prime; notch spacing</li>
<li>Two quick angle finders for 30&deg; and 45&deg;angles</li>
<li>Elongated notches for accurate line scribing</li>
<li>Anodized aluminum material with 3mm thickness</li>
</ul>model number: 8460Part Number: 8460Details: The multi-functional MC-Square300 is the perfect reference measurement and marking tool for precise woodworking, remodeling, and many other applications.EAN: 0737888846009Package Dimensions: 12.9 x 7.9 x 0.9 inches

Milescraft 2216 1/2-Inch Bearing Guided Straight Router Bit for Mortising

Brand: MILESCRAFTFeatures: <ul><li>Tungsten Carbide Tipped for long lasting durability</li><li>Bearing guided bit eliminates the need for guide bushings</li><li>1/4 inch shank fits most collets</li><li>1/2 inch straight for mortising and other router projects</li><li>Replaces 1/2 inch bearing guided router bit that came with the Door and Hinge Mortise Kits</li></ul>Binding: Tools & Hardwaremodel number: 2216Part Number: 2216Details: DescriptionAmazon.ca Product DescriptionTungsten Carbide Tipped Bearing Guided 1/2 inch Straight Bit for use with Milescraft Door Mortise Kit, Hinge Mortise Kit, and StrikePlate Mortise Kit and other similar kits. 1/4" Shank fits most collets.From the ManufacturerTungsten Carbide Tipped Bearing Guided 1/2 inch Straight Bit for use with Milescraft Door Mortise Kit, Hinge Mortise Kit, and StrikePlate Mortise Kit and other similar kits. 1/4" Shank fits most collets.EAN: 7147905985797Package Dimensions: 4.3 x 1.9 x 0.7 inches

Milescraft 84020113 Angle Finder, Black &amp; 8408 Center Finder - Center Scriber and Offset Measuring &amp; Marking Tool for Woodworking

Brand: MILESCRAFTFeatures: <ul>
<li>Product 1: The yellow angle divider divides any angle in half</li>
<li>Product 1: Features an angle measurement readout, allowing you to set your angle once determined</li>
<li>Product 1: Retractable edge guides allow you to get into confined spaces and determine the angle</li>
<li>Product 2: Center hole holds the pencil in a perfectly centered position as you scribe your line</li>
<li>Product 2: Offsets range from 1/16&rdquo; to 5/8&rdquo;, in ten 1/16th inch increments</li>
<li>Product 2: Notches for offset marking let you scribe off-center lines</li>
<li>Product 2: Rare Earth magnet allows for easy storage on any metal surface</li>
</ul>Binding: Product BundleDetails: Milescraft 84020113 Angle Finder, Black
AngleFinder is a reference for angle measurements for precise woodworking. Find Angles Between Two Surfaces on Inside and Outside Corners with Ease.

Milescraft 8408 Center Finder - Center Scriber and Offset Measuring & Marking Tool for Woodworking
Quickly and accurately mark centerlines on boards up to 2-1/2&rdquo; thick. CenterFinder straddles your board to mark a perfectly centered line along the face or edge of boards. Insert the pencil into the center hole, rotate the tool so the guide posts contact the material, then scribe.

Milescraft 86010713 Depth Gauge Measuring Tool

Quickly and accurately measure, mark or locate blade or bit heights and table or fence offsets. Easily lock and unlock scale with easy thumb lever. Metal scale measures in millimeters and inches.

Milescraft 8409 MC-Square150 (Imperial) - Aluminum Framing and Woodworking Square, 1 Pack

Brand: MILESCRAFTColor: RedFeatures: <ul><li>Inside and outside scales for measuring and marking the inside and outside of your work piece</li><li>6&rdquo; (150mm) square with 1/4&Prime; notch spacing</li><li>Two quick angle finders for 30&deg; and 45&deg;angles</li><li>Elongated notches for accurate line scribing</li><li>Anodized aluminum material with 3mm thickness</li></ul>model number: 8409Part Number: 8409Details: The multi-functional MC-Square150 is the perfect reference measurement and marking tool for precise woodworking, remodeling, and many other applications.EAN: 0737888840908Package Dimensions: 7.1 x 4.0 x 0.5 inches

Milescraft 8408 Center Finder - Center Scriber and Offset Measuring & Marking Tool for Woodworking

Milescraft 2215 1/8-Inch Downcut Spiral Router Bit for Inlays

Tungsten Carbide Constructed 1/8 inch Downcut Spiral Router Bit is perfect for clearing out inlay pockets and cutting out inlays. 1/4" Shank fits most collets.

Milescraft 8410 MC-Square300 (Imperial) - Aluminum Framing and Woodworking Square

Brand: MILESCRAFTColor: BlackFeatures: <ul>
<li>Inside and outside scales for measuring and marking the inside and outside of your work piece</li>
<li>12" (300mm) square with 1/4&Prime; notch spacing</li>
<li>Two quick angle finders for 30&deg; and 45&deg;angles</li>
<li>Elongated notches for accurate line scribing</li>
<li>Anodized aluminum material with 3mm thickness.Removable aluminum fence.Includes Euro Style hinge mounting holes</li>
</ul>Binding: Tools & Hardwaremodel number: 8410Part Number: 8410Details: The multi-functional MC-Square300 is the perfect reference measurement and marking tool for precise woodworking, remodeling, and many other applications.EAN: 0737888841004Package Dimensions: 12.8 x 8.1 x 0.3 inches

Milescraft 1221 PantographPRO - Complete Tracing Routing System

Milescraft 5338 5/16-Inch Dowel Kit

<div><ul><li>One 5/16-Inch TiN coated brad point bit</li><li>Two 5/16-Inch dowel hole centers for easy location transfer</li><li>One 5/16-Inch steel drill stop with set screw and allen wrench</li><li>Twelve 5/16-Inch fluted dowel pins with chamfered ends for superior glued dispersion and easy installation</li><li>Dowel pins made of hardwood harvested from responsibly managed Forest Stewardship Council (FSC) Certified forests</li><li>See more product details</li></ul></div>

Milescraft 8406 Exactor, Black

Milescraft 331406 Dual Tandem FeatherBoard Table Sa with & Router Table Accessory, Model No. 1407

We utilize our experience and expertise on all our products to prvide the best in the industry&#46; All our products feature premium components and are backed by the best team in the industry&#46; All products are engineered, assembled and tested in the USA&#46; We are trusted by millions of people for specialized products to meet their needs where they live, work and play&#46; Features. Features dual slide motion design for quick and easy setupSpecifications. Accessory Type&#58; Cutting. Extends&#58; No. Portable&#58; Yes. Extended Dimensions L x W x H &#40;in&#46; &#41;&#58; 2 1&#47;2 x 9 1&#47;5 x 8. Weight&#58; 2 lbs- SKU: NRNTL18373

Milescraft 1312 DrillBlock- Handheld Drill Guide

Milescraft 8459 MC-Square150 (Metric) - Aluminum Framing and Woodworking Square,Red

Brand: MILESCRAFTColor: RedFeatures: <ul>
<li>Inside and outside scales for measuring and marking the inside and outside of your work piece</li>
<li>(150mm) square with 1/4&Prime; notch spacing</li>
<li>Two quick angle finders for 30&deg; and 45&deg;angles</li>
<li>Elongated notches for accurate line scribing</li>
<li>Anodized aluminum material with 3mm thickness</li>
</ul>Binding: Tools & Hardwaremodel number: 8459Part Number: 8459Details: The multi-functional MC-Square150 is the perfect reference measurement and marking tool for precise woodworking, remodeling, and many other applications.EAN: 0737888845903Package Dimensions: 7.2 x 4.0 x 0.5 inches

Milescraft 8454 FramingSquare300 (Metric)

Milescraft 5339 3/8-Inch Dowel Kit

<div><ul><li>One 3/8-Inch TiN coated brad point bit</li><li>Two 3/8-Inch dowel hole centers for easy location transfer</li><li>One 3/8-Inch steel drill stop with set screw and allen wrench</li><li>Ten 3/8-Inch fluted dowel pins with chamfered ends for superior glued dispersion and easy installation</li><li>Dowel pins made of hardwood harvested from responsibly managed Forest Stewardship Council (FSC) Certified forests</li><li>See more product details</li></ul></div>

Milescraft 1300 Orbiter Any Angle Drilling and Driving Power Drill Attachment

The Milescraft Orbiter is a patented design! You can position the bit at any angle from the drill chuck to get into an infinite number of angles or positions, which allow for drilling in areas not otherwise accessible with a standard drill. Establish the drilling angle and twist the handle to lock into place. Reverse the handle to unlock. *Orbiter is intended for use with corded power drills at 1000 rpm or faster with 3/4â€³ and smaller twist and/or spade drill bits. Orbiter should not be used with any drill bit larger than 3/4â€³, any size hole saw cutters and/or any size auger style bits to avoid product damage. Not intended for use with Impact Drivers.

Milescraft(24)

Your data, your choice