Product Name: Chamfer Bit
Standard: 1/4-inch x 5/8-inch
Package Content: 1 x Chamfer Bit
Material: Tungsten Carbide
Color: Gray,Silver Tone
Flute Number: 2
Overall Length: 59mm / 2.32-inch
Bearing Diameter: 1/2-inch
Cutting Angle: 45 Degree
Cutting Diameter: 35.5mm / 1.4-inch
Cutting Length: 5/8-inch
Shank Diameter: 1/4-inch
Tool maintenance:Keep tools clean after using them, remove resin, sawdust?on the timber, using standard industrial solvent to clean the tool.
Apply a small amount of oil can prevent the tool surface rust, clean up all the dirt of the shank to prevent slippage during use.
Do not attempt to grind the tool or change the shape of the tool.
Notice:?When the tool is blunt, replace with a new tool,?do not continue to use the tool in order to avoid breakage and injury accidents.
Must use a suitable clamp(not included here). If the clamp is not round or worn, it will cause the clamp can not clamp the tool properly, please replace the clamp with standard specification immediately to prevent dangerous situation such as handle shaking, flying off or twisted off when the tool is working at high speed.