About the product.|Brand: Motospeed (Darmoshark)|Product model:M3|Shell material: ABS|Encoder:Feng shi Wei qi F-SWITCHF|Foot stickers:Teflon PTFE|Optoelectronic IC:PAM3395|Master control IC:Tri-mode Telink solution, 2.4G/ Bluetooth 5.0/ wired|Wire:Type-C data cable five-core braided flash rope with magnetic ring|Lithium battery:500mAh|Maximum speed:650IPS|FPS image processing:26000fps|Acceleration：50G|Left and right switch operating force:Kailh 60±5gf|SPI: 8ms/2ms（default）/1ms|Operating Voltage：USB Wired:DC5V±5% Wireless:DC3.7V|Interface: Gold-plated USB2.0 Type-C|Bottom sensor light：infrared light|Connection method: Bluetooth 5.0/2.4G wireless/Type-C wired|DPI:400 red, 800 blue (default), 1600 green, 3200 purple, 4800 yellow|DPI:26000DPI（ Driver settings）|Wired/2.4GHz: red light 125HZ, blue light 500HZ,green light 1000HZ|Size:129.55*66.12*39.23mm|Weight: net weight 58±5G|Driver installation: only Windows system is supported|Driver installation :http://www.darmoshark.cn/|Operating system：|Wired and 2.4G modes: WinXP/Win7/Win8/Win10/Win11/Macos|Bluetooth mode: Win8/Win10/Win11/Macos|Color: black / white / camel (optional)| |Bluetooth pairing operation：|When the bottom three section switch is turned to the B icon, press the left, middle and right buttons at the same time, and the blue light of the scroll wheel position flashes, entering the pairing state. At this time, you need to turn on the Bluetooth device to search for the N3 Mouse before pairing. After the connection is successful, the indicator light goes out.||2.4G pairing operation:|When the bottom three section switch is turned to the G icon, press the left, middle and right buttons at the same time, and the green light of the scroll wheel position flashes to enter the pairing state. At this time, the receiver needs to be inserted. After the connection is successful, the indicator light goes out. (Note: The factory has been paired and it is OK. If the 2.4G has no function, this step can be followed||Wired mod
